Viewing all customer Discussions for:

Door & Window

how does the spiral spring attach to the top of the tube??

I've attached two photos. One is two small holes that are located around my aluminum glazing strips -I understand that there is a tool that is inserted into these holes to pop out the clips holding the glazing strip in place. The other is of a part located at the top of a spiral balance. The screw ... (cont.)

Need 26 replacement channel balances. They appear to be 26" long. Thinking they may be the S385-26. Would like to verify and not sure wihich option weight to go with. Most of the window sizes are 30" x 59". Thanks, Steven

I am looking for replacement Tube Balances for my white vinyl clad double hug tilt windows. The tube balances in my window are 26 inches long, they just over a half inch 1/2 in diameter and narrower than five eights 5/8. The difference could be from the vinyl cover that has contracted over time ... (cont.)

2 3/4" x 5/8"

2 size windows .to replace all.I need 24 of lonGer 11 inch many and 96 of shorter 9 3/4 Dark gray

I wanted to know if I could order this door handle. This one is broken.

Please help me order the right replacement part The marking on the channel balance are: 14 2 IR CALDWELL, it is 15" long and 1/2" wide Thank you, Steven

Operator I am trying to replace for Andersen wood casement window.

I have a peachtree door that used to have a secondary latch that would keep the latch from unlocking. I actually had to move two latch turns in order to open the door. One of them broke off. Do you have this handle set?

I am looking for 4 door wall rollers that match these pics or ones that will work in place of these.

Hi I am attempting to repair some windows from 1994 that are still in good condition. However, the coil spring balance systems are broken and need to be replaced. I have attached photos for your review of some of the parts. Could you please help me identify them and let me know if you have those re ... (cont.)

I am looking for top and bottom pins for metal bifold doors. I hope the pictures I've attached will help. All the pins are 5-1/2" long. I also need 36" of track. Any help you can provide is greatly appreciated! Thank you.

Do you have a 2 wheel model that can act as an upgrade to 81-071?

Hello, I'm in search for a pivot bar for a Acan DH Window. Do these pictures help at all?

I need about 30 of these plastic guide clips. They appear to snap into a slot on both sides of the sash toward top and bottom. They keep the window sash centered when opening and closing window. Thanks for your help.

the 81-095 is almost what I need except the adjustment screw is on the top. Do you have that Acorn roller? Michele

Not sure what to order. Pictures are for top and bottom hinge. They are on the right hand side of door looking from the outside.

THIS IS THE PELLA SCREEN DOOR HANDLE I TALKED TO YOU ABOUT ON THE PHONE. WAS INSTALLED AROUND 1995. ARCHITECTURAL SERIES. NEEDS THE LATCH REPLACED, I CAN NOT GET THE HANDLE OFF.

I need to find the entire (interior AND exterior plate) handle set of this or a suitable replacement. This one is intact, but the sliding door on my living room is missing the set completely. I found an interior handle at Home Depot that fit, but it did not include the exterior plate (!). Why Home D ... (cont.)