Viewing all customer Discussions for:

Door & Window

The latch handle came out of the socket. It feels very soft like rubber. Do I have to replace the entire latch or just the handle? Thanks

When i try to open this window it actually falls out. I'm guessing in needs something on the part where it slides. We have 3 other windows the same as this. Any thoughts of what i need?

Please determine if you have a suitable replacement for this awning control. I have several other similar windows with broken handles, but this one is most critical. Please let me know if you have a replacement and I will complete the order. Thank you.

Can you please help me find these pieces.

Trying to identify the correct part. The only stamp on the channel is 28F. The metal channel is 29" long. The width of the channel is 1/2" or just short of 5/8". The end plastic piece is 15/16".

Pins rested off,weaken, need replacing

Good morning, Hopefully, you can identify the patio door latch. Thank you

The markings on the metal chanel are 28C E BSI. The E is on a smaller font than BSI.

No brand markings. Need a few of each thank you

Sorry i couldnt get the part off without breaking it further. It has been ducked taped for a while. It's the piece that slides into a track at the back end of the sliding screen door. It's kind of a Z shape. the sliding glass door has PPG Herculite K stamped in the corner. We measured the door at 78 ... (cont.)

Hi The Width is 3/4"

Windows are 45 years old, found this in one window missing other. only three windows small condo. All windows do not slide without a lot of effort. Found no name window company yet. Thanks Tommy

I need to replace

Attached are (4) pictures of my existing tilt window latch on my windows. As you can see mine has no lip around it like yours does. I need the same one but in a flush mount. Yours sits too high on the window. I would have to return the (4) I purchased regardless. Please advise. Tried 26-419 ... (cont.)

Good morning. I'm on the hunt for glazing beads for an old Pella storm door. I have attached the model number of the door as well as the strips/beads i need. Thank you

Can you please help me identify the part numbers for window balance shoe and coil (with coil case) for WI Windows and Doors brand model S3500CHS window that's 36" x 74" and is labeled with manf ID # 1260653.3 Thanks very much

it looks like the spring has broken as well. I would like to replace it.

Hi, I think I need the 15-177 coil balance shoe, the 15-144 coil bushing cap, the 15-145 coil support barrel and the S152-7 7 lb 152 series coil balance (the current one is stamped 7) and 33-072 Philips screw. 2 of each, but I’m concerned that the shoe may be too wide (the current one measures ... (cont.)

Trying to ID and replace

Most of the handles are broken, I have two sliding glass doors and only one of the 4 handles are in tact. The metal rod is missing on all the rest besides the one in the picture. I need suggestions on what to replace this with. Definitely need something that locks although a key doesn't have to be n ... (cont.)