Viewing all customer Discussions for:

Door & Window

Do you have this part?

I'm looking for a Hydraulic Door Closer for my Storm Door that has a tube 12" long and 1 inch wide. The Home Depot and Lowes door closers I have found are 10.5" x 1" like you product code 40-167 (drop pin style I guess is the term). With the longer door closer I can open my door up a little mor ... (cont.)

I ordered S770-28 but it is not the same as my old balance. I have attached the pictures from my old channel balancer( The old channel balancer has a 28F stamped on it, but the overall measurement from metal tip to metal tip is 29 inches and 30 inches with the hardware. The old channel balancer and ... (cont.)

I am a homeowner looking to fix the balances on (3) non-tilt windows. Without taking the sashes apart now, is there a way to identify which parts I will need? Thanks! -Matt

Please help me identifying what take out clips I need. Picture attached. Thanks Kevin

I am just wondering you help me ID this part. The gear is worn out ad I need to get a replacement one. measurement is 3" (screw in between) and for the handle is 13.5" length it has marking TRUTH 45251 and 01972004 0327 for single folding crank assembly. Thanks

Hi Swisco, Trying to identify my channel balance for a dining room window. See the attached pictures for the ends. The balance is 1/2" wide and 30" long. There are two or three of your channel balances that seem similar. Let me know what you think. Thanks James

I am trying to find the proper replacement awning window operators. They look similar to 39-026 but a couple of differences the attaching arm is 2 1/2 inches long and it has a 3/8 hole which had a plastic sleeve . The arm has a slight offset. The windows were manufactured by Marva in Puerto Rico bac ... (cont.)

I build in 1999. The white plastic "glazing"? Is brittle and many broken. The one missing at the bottom was in my grandsons bedroom. They appear to be square in shape 1/2x1/2". Is there a easy way to make them look better?

We moved to the home last July, the handle has been broken since around October. Unable to find a replacement. No markings, numbers, or brand names anywhere on the door. Photos attached. Any advice would be appreciated. Thank you, Bob

About 2" x 15/16" x 3/8". Installed in generic single-hung spiral balance windows with no other visible markings. Any ideas?

Do you mind looking at the attachment and help me order the correct part to replace the glazing on one of my windows. Thanks! Jack

Can you please let me know if you carry any of these ?

Del Mar Engineering Pat # 3,670,357. Need replacement of 4 roller assembles.

Hello... I am the Custodial Director for Houston R-1 Schools in Houston, MO. We have some windows in our older buildings (windows may be from the 70's?) that need balances... In the past, I have found it difficult to find these balances... but I think I have found them on your site... As ... (cont.)

Good Afternoon. I believe i have 9/16 pivot shoe however my original has a screw. does the screw make a difference? I have double tilt window and had recently purchase two balance from you. I am not sure if i have installed balance incorrectly or need new shoes.? it is still tough to push ... (cont.)

I have a Double-hook Mortise lock in my sliding glass door. It looks identical to your 82-238. To make sure I am trying to take the old lock out of the door. I have removed the four screws on the lock face, and I have removed the two screws holding the handle on. I can't get the handle off t ... (cont.)

I have looked at your video on how to replace the operator part for my awning window. The only problem I have is that my old handle will not open the awning window. What will happen if I remove the operator - would I be able to push open the awning window since it won't crank open? I have tried pu ... (cont.)

I want to know which part is good for my window. See attached images. 26-264,26-244 or 26-298> Thank you!