Viewing all customer Discussions for:

Door & Window

I am in need of a replacement single roller for my sliding glass door. The door was installed in 1986 by the previous homeowner in Mt. Sidney, Virginia. Unfortunately there are no manufacturer markings on the door. I would like to buy several replacement rollers to keep on hand should this problem o ... (cont.)

Please help me find replacement parts (I think they are called tilt carriers) for a double hung window, size 30" x 48.5". Manufacturer is Javco. I have included photos and can provide more if needed. The part is about 1 1/4" high, but I can't tell the full width because it's in the track. Thank ... (cont.)

I bought 2 balance shoes to repair my window but the ones that I received (15-195) are a little fatter than the ones I need I think. I have tried and tried to make these work but i cannot get them into the window. The ones that came with my window are probably 3/8in where the ones i got sent are ... (cont.)

Your 70-048 clips appears to be suitable replacements for broken ones on my old Malta screens. Before buying some, however, I'd like to get your opinion on whether or not there are other types of screen latches available that would fit Malta screens, perhaps something made of aluminum or that attac ... (cont.)

Hi, Didn't see anywhere where the 751 ribbed channel balances come with the clips for hooking onto the jamb liners? Do they or do I have to order separate? Thanks, Pat

I am looking for a replacement recessed lock keeper for a Capitol double hung window. The overall length is 3 inches.

I am trying to replace a lockset that came off a Grisham Steel storm door. The worn out one on the door has this stamped on it : PADO 0794 and made in Brazil. Would your product : Complete Mortise Lockset, Brass Product Code: 40-049 replace this ?? Are your products available at Home Depot, ... (cont.)

Need help identifying screen corner

Need replacement snaps, don't know manufacturer

Need to replace balance boxes on small bath windows, Anderson brand, vinyl clad. Old balance boxes show stamped numbers B14 4 19 071. Which replacement boxes do I need?

This plastic piece normally inserts on the top/side port of a 2-pane slider, non-tilt window, and holds the top part of a channel-balance spring system. I need to find a replacement part for a broken plastic piece (not shown) Thanks

Casement Windsor operator needed

We just replaced the wheels with new from Home depot and it works like new. I was going to buy new tandem rollers in the event Plan A failed. But it looks like we are good.

I have rollers from Truth, 30410, 1980 US Pat 4.194.266, which have to be replaced. Is your product with code 81-018 the correct one? Kind regards Bo

Hello there, Please can you help a "limey" in distress. I am looking to replace a sliding door handle and I believe that it is the same as the one shown above. The 2 handles are inscribed as follows: DNS Industries 13/23 outside pull - standard. Miami, Flo., and 16 inside pull. I have watched yo ... (cont.)

We are trying to find either t-handles or folding handles to replace broken handles which are from anderson casement windows that were installed in 1973. The number on the bottom of the crank there is a number 60-C-704-62. I have tried 3/8" cranks from my local hardware store and one of the problems ... (cont.)

Door handle for framed glass door in home. Must be replaced with same sized part but in addition, must have a lock for a key on it. Handles came with the door but the make of the door is unknown. In pictures, codes are: - on white part: CD452, length: 7 inches - length of

looking to replace a number of pivot shoes that have broken over time need the figure out the correct style and size and it look like i need a track spreader to assist with the replacement

the edge of the door is channeled therefore the lock needs to be on the inside of the door.

Does the 90-193 window lock come with the hardware to mount to the window? If not, what is the correct hardware size?