Viewing all customer Discussions for:

Door & Window

I ordered a new 82-002K handle set with keyed lock The tumbler supplied (13/16) is too short. The original tumbler is 1 inch. The little tag does not engage because the tumbler shaft is not long enough. Unfortunately the first set I ordered I broke a piece and had to order a new set. So my doo ... (cont.)

Can you identify this part, the outside handle broke off and I need a new handle set.

Hello, I am needing to replace the weather stripping on these Alcoa windows. These windows were placed in 1995. Would any of your weatherstrips work for this? Thanks, Rachael

I have taken a few pictures which I hope may help your research folks to find a best match. As you see, the name on the original lock set is CROWN. The hole/opening in the door when this lockset is removed (see photo) measures 2 cm x 18 cm.

A home inspector found what appears to be a broken detent clip. There is no clear marking as to the window manufacturer, etc. Any information or direction is greatly appreciated.

Looking for a top sash guide and Jordan window balance. The balance is 29" metal to metal or 30" overall

Hello, My home was built in 1987 and the windows are original to the house. The window brand is "Imperial Windows". Half of the windows are non-tilt windows and the spiral springs and weather stripping have gone bad on them. I am curios how to replace the wool pile weather stripping that is instal ... (cont.)

I have several single-hung windows with rubber seals that have cracked. The profile is shown in the attached picture. Do you have a matching seal? Thank you

Please see pictures for the missing vinyl molding (bottom of an Andersen window with two sashes that opens on left and right), the molding is for the fixed glass in the middle. Unfortunately after Hurricane Sandy, the old vinyl piece was misplaced and disappeared, the missing piece measure 44 7/8" ... (cont.)

Hi - I need to replace the spiral balances with what I believe are 32" Series 400. The current balances do not have a colored tip. Is there a way to calculate the color needed when the window is not removable to weigh? The windows are 30 3/4" x 32 double pane aluminum GA windows. Thanks! ... (cont.)

Looking for replacement track cover Wear to buy! In Abbotsford B.C. Canada. Thank You!

Looking for this glass retainer clips. They are from the Pulaski furniture line. The clip is from a curio cabinet model number 102003. The clip has 4811926 marked on it.

Would this be Equivalent to your S180-4 spring. It's from a small bathroom replacement window. Thanks a million.

Do you provide rollers for ADOR sliding double pane doors installed in 1960?

Hello, I need to replace the rollers on my sliding glass door but I am not sure what the make or model of the door is??? The attached photo is the only number I could find on the door. If someone could tell me what the make and model of the door is that would be great. Thanks in advance. ... (cont.)

Hello, My mother had this door installed a few months ago and soon realized there is no keyed lock with it. Can you determine what lock assembly is needed from the attached photos? It appears to have a punch-out to install a mortise lock but, without having that tumbler I do not want to attack th ... (cont.)

This is what I am looking for. This piece is in good shape and I would like to find replacement parts for my broken drawer slides. This piece mounts onto the bottom of the drawer and is inserted into the metal slide that is on the cabinet.

Hello. I have several Masterview by Atrium windows that are missing wheels and a few more missing wheels with the plastic piece. Do you have these replacements available? Thanks! Fred

The house we bought has 4 wood double hung Pella windows that do not have sash lifts. I asked Pella who locally would have their sash lifts and they gave me your company's name. I looked on your website but did not find any Pella sash lifts. I did see your product 20-007. I would think it ... (cont.)

Do you have advice on how to choose the correct sash weight range? Our neighbors with identical windows used 2410 for the same windows so that's probably a good weight range for us to use. But I'm wondering if we go with the next weight range up, 2420, will that give the windows better support when ... (cont.)