Viewing all customer Discussions for:

Door & Window

this is on the top of a screen it only goes through the frame to the spline track not all the way through

What length is the Anderson 3/8 Glazing?

Hope you have this. Not sure of window manufacturer. steve

For my vinyl windows, I have a weeping hole cover that is 2.5" long and has a center square hole and two round holes topush in the hole cover. The holes are 2.185" apart and the square center hole is 1.551" wide and measures .3125 in length. The flap opens in the middle to let out the water. It's th ... (cont.)

I am looking for a patio door handle/lock. The only info I have is the number on the inner side, L-120.

Hi, can you tell me what kind of latch/keeper will work with a Mortise Lock, 4-5/8" Product Code: 82-226 (similar to whats in door now) I have a patio door in a new house that never had the latch side installed. handle in on door but nothing to lock into. thanks for your help. Craig ... (cont.)

Hi Swisco, I have a sash with S-180 coil balances. The coils on both sides have broken. They look like they were cleanly cut. The stamp on the coil end is "5Y". Does this mean a 5 pound coil? What does the "Y" mean? The sash measures 21.5" x 21". I believe it is single strength insulated glas ... (cont.)

Op05-7553-02 need help finding this. Both a right and left would be great. The handle is a hex not spline. Almond in color.

I'm looking for glazing strips for old Capitol aluminum single hung bronze windows. Please note that the top bead on the upper stationary window is wider than the rest. Let me know if you need any more info. Thanks, Bruce

I am looking for the window stops The trim pieces on the outside of the windows

I need a 34B channel balance with an attached shoe. Please see attached image of said shoe. Do you have this?

I need to of these

I need to replace a door stop the only identifying number is the Patent # D429,619. Its brass plated, the body of the door stop is seven inches long, 3/4" wide, and has an anchor screw hole on the top and the bottom is 1 1/2 inches from the bottom. Is there a local hardware store that sells this it ... (cont.)

please send me the part # that matches these pics so I can order units from you guys! Thanks

This is the snap in glazing bead that I will need to replace with a broken window. Which of your available snap in glazing beads would best work as a replacement? Jared

I need to replace two broken pella locks. The 90-213 matches up with the current holes. If I were to order the 90-243, would there be any difficulty other than to drill new holes to match up with the 90-243 specs?

Sliding shower doors installed early 80's. Think they are sterling. Bottom of one 29" door bent after a fall and guides are broken. Part 10-127 is the right style guide and the measurements fit. Is it two guides per door? Also, I don't know if the bent part (sweep?) can be unbent or if that unscrewa ... (cont.)

Last year I purchased Item #S900-29, 29" series 900 spiral balance from Swisco for my Philips window (Philips went out of business) in my manufactured home. I have replaced the spiral balance today but the window insert bracket connected to the spiral balance on the right hand side broke off so my ... (cont.)

Hi, Please let me know if you have this balance and how long would it take to send it to me? I will be needing 2 to replace both balances. I live in Naples, FL. It is 30" long and 1/2" wide. Thank you, john

Hi, I would like help in selecting the replacement roller assembly for our sliding glass doors. Attached are pictures of the existing roller assembly. Thanks for you help. John