Viewing all customer Discussions for:

Door & Window

dimensions: 6 5/16 long X 2 7/8 wide X 3/4 thick I need (2) two of these, do you have them, what is your part#, price, and shipping to 48623? Thank you! Marty

Hi, I have 5 crestline sliding windows that were manufactured in 1996. I am looking for replacment keepers. The part number stamped on the back of the keepers is 9906 and one of the serial numbers off one of the windows is y20496Z27C3M. the approx depth of the keeper is 5/16 and the width is 3/8 ... (cont.)

Please help me locate the attached pella screen clip from ~2002. I need both the left and right clips.

I just wanted to be sure that I have the right part number when I order. Thank you for your help!

I need replacement parts for the broken window channel (picture 1) length: 27 inches, width 1/2 inch the only marking on the part is 2630 (picture 2) the window is a single hung type Please help me and if you have any questions, please contact me. thank you

Can you tell me the thickness of the insulated glass that Alenco used in their single hung aluminum windows. I am guessing 5/8".

Are these pictures the same roller as yr item #81138? Notice the split at the screw hole. Thanks

Hi...the handle drive splines are stripped out of the the worm gear on my Jalousie window crank assembly. If the worm gear was available it seems like an easy repair. If not, I would be in the market for replacement assemblies. I have attached an image of the crank assembly: the mounting hol ... (cont.)

Hello there, I'm having trouble indentifying a replacement part for my tilt window latch. I provided a picture with measurements hoping to find a match. This particular latch is for the right side of the window. Thank you.

This is for a Milgard window. The length is 33" and the channel width is 1/2". The window weighs 24 pounds. I think I need the 33" Series 385, but I am unsure which option to choose. I also need replacement top sash guides, but was unable to locate a matching one in your online catalog. I will ... (cont.)

G'day, Have you a short handle that will fit the 39-001/2 window winder to accomodate venetian blinds?, thanks frank

The Entry gard piece indicates R for the piece need in bronze. We took the number from the left side window. Also we ordered an operator covering braze and we received bright brace instead bronze. What is the next step in returning the operator cover to get the BRONZE? Thanks Dothlyn ... (cont.)

Can you explain the price differential between 75-032 and 75-503? Which is most common?

1/2" wide and 30' long. on the unit it has 2910 and the other has 2900 i need 4 of each alcan windows 36x64 is one they are 25 years old alcan windows 18x64 thank you mike

I have a 1/2" block and tackle balance stamped 273000H does this mean anything to you? Is it simply for 2720 window. The top looks similar to 19-005 and the 15-004 or -005. What series do you recommend? Thanks, Mario

Metal is 27"

Hello, I am looking for a replacement part for my storm door. My house was built in 1985 and I believe the knob is original. There are no markings except for Pat Applied for on the white part. The knob part measures approximately 6 inches long, 2 inches wide and contains a lock. The white part has a ... (cont.)

I called in we need these

Just want to be sure that I have the right top/bottom pieces on my 33" long 1/2" channel balance. Looking at your website, I'm guessing that the top is a 19-002, and the bottom shoe is a 15-002. Since it's a 34 pound window, I'll spec it as a 3260. Please confirm. Thanks.

this is from a 1980 house, no name on hardware. 2 photos are outside handle Number inside: 608-2-1 Any ideas? Thanks Dan Last