Viewing all customer Discussions for:

Door & Window

Placed an order with in the past for a Polybeau window pegs under the name of Masuko Mack approximate length of 2 1/2 inches that fits on the bottom of the window that assis in the up & movement. I need to place an order for a shoe for the pegs to fit in. Can you assist me? Here is a picture of ... (cont.)

Please let me know if you a replacement for this the hooking park on this one is set

This one is 26" in length metal end to metal end. We are at a camp and need to go through 10 buildings and take a count. This is a inquiry to find cost an availability. Thank you, Doug.

Please confirm. I think the replacement balancer for me is the 27" series 385, S385-27, option 2640. The bottom shoe mic at 1.075, maybe some wear?? With the pics I sent is that your recommendation? Thank you for your time and help

I need to replace several channel balances whose springs have broken. They are for non-tilt aluminum windows that are old (from the 60's at least). They are the 1/2" wide type (actually a bit over 9/16") and the metal piece of the part is 22" long. There is a stamp on the part that says "21 B", a ... (cont.)

we need to locate a replacement carriage for the attached photo

Window balance system failed (marking "32 5" ("B.S.I." or "TS8") PH"} pic 2226. Pulley line found broken, top plastic channel stop piece (screwed in channel, found broken, See pic 2223, pulley string guide roller split in pulley pic 2242. Need replacement channel balance system and stop piece ... (cont.)

I need truth window crank open to. Left single arm 9 in long from hinge to hinge please see picture of existing

I need a pivot bar assembly for my 17 years old Carefree tilt window. Your 26-379 part looks just like mine but mine only measures 1 and 7/8 and the 26-379 measures 2 and 5/8. Do you sell something like 26-379 but 1 7/8 long?

I am looking for replacement clips for a china cabinet which has plexiglass recessed panels which require these clips to secure them. The clip is approximately 1" long, and there is approximately 1/2" from peg to centre of opening. The peg itself is approximately 5/16" high. Would you have s ... (cont.)

windows from home build in 1993. this is the inside storm window latch that holds the window up. Thanks!

I bought a bunch of 15-014 terminals and they seem to work just fine. I found a complete existing one and it matches your 15-197. The original ones havent held up very well. I need to order more and dont know witch I should order. The originals were eather a bad batch or bad design. The 15-014 wor ... (cont.)

I need two white folding cranks that match.

I need help identifying the part number for the top sash channel guide shown in the attached photos. I could not find this part listed in the product catalog.

Hopefully this has the photo attached. Attached is a picture of the sash support of your Wilmar Dbl hung window from the 1998 era. Tom

Need parts to replace broken window crank

I can mail this in if need be. I have about 11 windows approx. 18" wide ranging 36" to 48" tall and not sure how this comes (Rolls?? Pre-cut lengths??) Many Thanks Carter

The Part I'm looking for is identical to your window sash lift handle 26-116. However I only have one quarter inch space not three-quarter inch. Do you have a part like that?

I am looking for a Metal version of this window lock keeper. I do not know the window manufacturer unfortunately. The part is about 3 inches wide and is bolted on the face of the sash as shown. The original keeper is plastic and I am looking to find a metallic version.

Hi I'm hoping you may be able to identify a vinyl glazing bead that I'm having trouble locating. I need one piece at least 40" long. Thanks!