Viewing all customer Discussions for:

Door & Window

Aloha. Can you identify the screen door lock from the attached photos? The part in the screen door itself has lost its little arm, the thing that would engage with the locking mechanism in the door jam. The photos are as follows: 1) lock mechanism on inside (locking side) of door 2) the thing i ... (cont.)

I have 8 Double Hung Peachtree windows series 300 with block and tackle balances. The stamp on side is 28 TG. I have 9 of the 28 HD balance cartridges that were left with me when windows were installed. I have been able to repair 2 of the 3 windows were the 28 TG balances have broken with 4 of the ... (cont.)

this piece seems to be the problem. Do you carry a replacement part?

Hello- I also need to replace the sash balances on some Anderson windows, approx. from 1990. It is stamped 11600-17. The other info on the balance is 11600A-3 and 3335-455 I do not see any other serial numbers. Any replacement parts?

My existing spiral balances are 3/8" in diameter and 29" long. I took the sash off and weighed it - 18 pounds. Which color tip spiral balance do I need? Thank you!

It's for a Anderson 400 series French door it has a screen slider I want to be able to lock it from the inside

Dose it work from the inside and outside/ can I lock and unlock from the inside and outside??

I have a patio screen door that use your 84-108 wheel. one wheel is out now. Would you please show me how to install it back to the position, thanks.

I need a 40-081 like latch but I need one that has a greater distance between the base and the spring loaded bar. Shimming won

I have Thermal-Gard tilt in windows manufactured 8-04-1993, Model T05, The Conserver Series. The Pivot Shoe will not move and window cannot be moved up or down. I found one on your site with Product Code 15-048 which looks exactly like the one that I have. I would like to order but don't kn ... (cont.)

WE ARE NEEDING A SLIDE BOLT IN BRONZE LOOKS LIKE ITEM 91-054 ONLY SHOWN IN WHITE

I am looking for a replacement for locking hardware from my Andersen Window glider door (vinyl inside). When I took the part off, it had a few numbers including 7700-14 and 2573558. Can you suggest a replacement?

I saw another post that recommended a series 385 to replace my channel but the shoe is slightly different so I wanted to confirm. My sash weighs 33 pounds and the length of the channel is 30". I was going to go with the series 385 with the 2960 option. Can you look at the pic of the shoe I have ... (cont.)

I found this information on a sticker attached to the window...not sure if it helps... Simonton H-R45-36x60 F0078 A23

I need a replacement roller for my sliding glass windows. Attached are some photos. Please let me know if you have these available. I need 8 pieces for two windows.

Hi! We have an aluminum frame sunroom with two crank out awning windows. Sunroom installed in 1990s by Patio Enclosures in Buffalo NY area. One of the crank windows cranks open but not closed as inner parts probably stripped (crank itself is fine). Do you deal with sunroom window parts? We are ... (cont.)

My balancers have the following stamped on them E41 9#27 7-77 My best guess is 1033. What do you say? Thanks Tony

Photo is of the stop on the top of the window sash for the channel balance spring assembly. It is an aluminum frame window. I am desperate to replace it and would like to order four if you stock them. If you do not stock these do you know who might. I do not know the name of the window manufacturer. ... (cont.)

Hello, I am looking to replace the broken window balances. Thanks, Brian

I have attached 3 pictures of a piece of bead I took off of a house in Spanish Fork, UT. I have looked all over this state for the bead and all the glass companies keep telling me that the bead is no longer made. I just found your page and it looks like 55-180/55-180-6. Does this appear to match to ... (cont.)