Viewing all customer Discussions for:

Door & Window

Hello - Please see attached pictures. These are from Patriot Windows installed in a new construction home (2008). I want to confirm that these are Series 795 Channel Balances. Also would like to confirm that the replacement part you provide has the pivot shoe/brake connected. Also curiou ... (cont.)

The pin/peg at the top of my peachtree window screen as seen in the first image has broken off several of my screens. I'm going to assume the best option is the plunger pin 70-009, but the frame on my screen isn't rectangular and I'm not sure if the plunger pin will work properly with my frame, see ... (cont.)

I have a set of shower doors that were installed in probably the mid 1980s Im guessing, and 3 of the 4 bottom guides have broken off and its become a real nuisance. The bottoms of the doors swing in and flop around, and sometimes cause the top rollers to fall out and there goes the door. The plas ... (cont.)

length 5 3/4" center of hole to center of hole wide 3/4" tall 1 1/2" housing bottom to top weight bearing cleats roller 1 1/4" diameter x 5/16" wide

I need 6 replacement Daryl sliding glass door locks, non-keyed. The existing Daryl door lock overall dimensions are 7-3/8" long x 1-1/8" wide and a screw spacing of 6-13/16" center to center. There are 2 part numbers - on the exterior part is P/N 15047 and on the interior part is P/N 15049. Any help ... (cont.)

I need new screen door tension spring/roller units for a sliding door. I assume it is a Certaintee door unit because the house has Certaintee 400 series windows throughout. The sliding screen door has a very thin tension spring/roller unit that I have not been able to find locally, even at a large ... (cont.)

I have an older (25 yrs) "The Atrium Door" brand screen door that has a broken nylon adjuster lever (internal to the door) and broken spring wheel. I think I found the steel wheel in the 84-006S, but I don't see a replacement adjuster assembly. From the products on your website, it looks like I ... (cont.)

First thank you for your help with Anderson balance part # couple weeks back. Also how to video you have on how to replace is spot on. A+++ Today I have two Anderson double hungs. First one measure approximately 36x61 11600-17 BE9-10#31-07 Second one measures approximately 40x61

The Balance I have has no color on the end and is spiral 3/8 x30" Tilt window latch is show in picture Pivot lock shoe I also need the spiral tool

I need one left and three right "catches" for top pivot in windows. Name on latches is Norandex. Can you tell me part number, availability and price? Thanks.

Hello, I have attached two photos showing a jambliner, shoe, and sash clip for an old (early 1980's ?) Crestline window. I would like to quote and order new replacement springs with shoes attached if this type is still available. Please let me know if they are available. Thanks, Harold ... (cont.)

I am trying to find two replacement handles for our pella windows. It appears that the size of the fitting is 7/16 and the handle is approximately 4-1/2 to 5 inches long. The end of the handle is labeled Pella. Ed

Trying to find replacement for this part. No real markings other than "hook up" on front. Can't get the mechanism out...was told by locksmith that it must be removed by removing whole door. Tried Home Depot, lowe's and ace hardware but none of their mortise locks work. It looks like the length of th ... (cont.)

I received my order for a 89-021 Steel Keeper. I must've ordered the wrong one it's about 2 inches too short. My door is a new castle XT SDG if that helps and I need to still keep her

I would like to buy 3 operators like this one and 2 operators that open the windows the opposite way. the casement windows are Malta 7A4. probably from 1986 or so. thank you for your help

Will your 84-017 work as a replacement roller for this track? Total assembled width of the the roller with attachment hardware through the hanger strap is 1/2" . The roller is 1" grooved X 1/4 " thick. Inside dimension of the track is 9/16" The strap is 3/16 " thick with extrusion. Thanks Mark ... (cont.)

Looking for small part that is circled. Trying not to buy complete set.

Need replacement parts for this sash cam

Hello I have been trying to find these clips for my windows. A need replacements for the right and left side. Would you be able to offer me direct replacement? Thank you for your help Jason

Could you help me to find it? This is plastic part which holds sliding arm Pictures identifying part and window are attached Thank you, Michael