Viewing all customer Discussions for:

Door & Window

Please provide part number

Please let me know if you have this part, the part number, and the cost.

I need some spline for I was told Peach tree entrance door wide plastic just under 7/16 of an inch Ace hardware said get the rubber on instead of plastic do you have this please give me model no. so I can order.

I need one of these locking mechanism for a Nuprime double hung window. It's the part that is on the top of the bottom window of the double hung. When you slide the moving part it allows the window to swing down so you can clean the window.

I need the partner to this part. The part that this latch connects with to lock the window. It is double hung and the part I need screws into the upper part of a double hung window.

I am attaching some photos of two assemblies which require new rollers or replacements. The roller assemblies are simple 1 3/4" x 1/2" ball-bearing nylon rollers which are mounted in u-bracket frames. The adjustable roller assembly is attached with a #10 screw but the front non-adjustable assembl ... (cont.)

Need one clay colored window handle crank stamped US Pat 4.083.264 Can. Pat. 1979 45012. Non folding. Round (non notched) opening is 11/32". Fitting into a square: Length is 3 1/16". Height to center of round opening is 2 1/4 ".

Dear Sirs, I would like to ask if you sell with the attached product also frames? Thank you for your reply. MADE IN U.S.A. PAT.4,673,777

I

The unit I am trying to replace has the following information stamped on the inside: DNS Industries 13/23 Outside Pull Miami Fla. -1400 Series DNS Industries 12 Inside Pull Miami Fla. -1400 Series The unit appears to be 7 3/8" in height, 15/16" in width & 6 5/8" screw hole centers with a safety ... (cont.)

Need to replace spiral balance and correpsonding pivot shoe. Balance is 29 inches long and approx. 3/8 diameter. Seems to have a white or very light green tip. Pivot measures 1/2 inch thick, 1-1/8 inch wide, and 2 inches long. See attached photos of old balance and pivot shoe. Need help choosing c ... (cont.)

approximately 6.25" x 2 7/8". windows are about 40 years old.

I have two windows with broken coil balance. Window 1 sash_height: 31.5 inch sash_width: 31.5 inch Coil Spring Stamp Number 8 Window 2 sash_height: 37.5 inch sash_width: 23.5 inch There are 2 ciol springs Coil Spring Stamp Number 4 and 5 Which products I need to pick from your list, ... (cont.)

My windows were built by a local company that is no longer in business. The balance springs have no markings or other form of ID. They are approximately 3/8" in diameter and the tube is 28 7/8" long. Most of my windows (6 lights)weight 15lbs but a couple of smaller 4 light windows only weight 10 ... (cont.)

need to buy 2 stainless steel coil balances. don't know how many pounds. The plastic housing says it is a 3/8" coil dual support. On the steel coil is printed: * 6.0 35" p 5232200 I believe i need the series 165 coil balance. How many pounds and I need to buy two right?

just looking for replacement parts for this trying to find out who makes and is it available

I watched the movie for 70-048 but my screens are good, the plastic latch break the first time you take the screens out, do you have a latch that you dont have to replace the screen to use.

I need some white clips for the screens on my patriot windows to keep them in place. They are a white plastic clip. Please let me know where i can purchase them. Thank You

Kindly review the attached pictures and quote 100 pieces, with lead time, FOB point, shipping weight and dims. Marks: 27-5 CE5 CMC Thank you Dale

Looking for tilt shoes, no name no #'s. Appears to be similar to15-194. Measures 1 15/16" by 15/16" by 1/2". Any suggestions? Thanks for the help.