Viewing all customer Discussions for:

Door & Window

Please help me identify this hardware. The channel balance has 2430W stamped on it.

How does one order this part for left closure or right closure with the part numbers offered?

I am not able to choose the correct balance with your pictures on the website. Could you please assist me. They are 1/2 inch square. The first is 24 in with the inscription 2320 the second is 16 inches with the inscription 15B.

Hello there- I have Milgard windows (3'x4') and one of my balances just broke on one side. I took the old balance out and the only markings I saw on it were (38 4 Caldwell). I took measurements and the metal bar is 39", the channel is 5/8" wide at the back and 1/2" wide inside the spring chan ... (cont.)

Our 1969 aluminum alenco windows are hard to glide shut as the rail on which it sits is worn and rugged. I am looking for the long strip of hard rubber or plastic that is channeled so that it can be inserted lengthwise into the existing damaged rail on which the alenco window sits to allow the wind ... (cont.)

The manufacturer of the door is "Elmont." The handle and lock is from the Wright manufacturing company. The numbers on the silver metal plate on the inside door jam is 96337. I would like the handle in bronze like the original one is. Is there a replacement part for this handle? This one is all pitt ... (cont.)

Regency windows, by Window nation F-E 4629 1024E101 W 64850 P3790 I need Replacement latches for my tilt window

Recently purchased a condo built in the 1950s with the original windows. The glass and the frames are in good shape. The windows balances, however, need replacing as they are rusted and in some cases falling apart.

I need to replace the balance on two different size vinyl windows. Both existing balances have a stamp: 27C FG and the letters B.S.I. run perpindicular between the former alpha-numeric code. This would seem to be simple enough using the instructions on your website, but one window weighs 19# ind ... (cont.)

We think part 90 063w is the one i need but cannot tell how big the diameter is. The one i need is about one half inch round and the depth is about the same. I bought one but it was too big around. Help if you can. I do not know the window type the house is about 14 years old.

Hello, Attached in the operator I am looking for. There are no markings on it. It does not seem like there are markings on the actual window either. At least nothing obvious. Thanks!

I have an opening in my sliding window that is approximately 2" wide on the outside, the inside is harder to measure as it is below the window track. My question is are weep hole covers normally placed on the inside or outside. I'm not sure I can place a cover on the outside as the window already ha ... (cont.)

I am looking for a replacement lock for a sliding patio door. It is an inner lock and the measurements of the opening are 80 mm long and 13 mm wide with a rounded face. The distance between the centers of the two screw holes is 92 mm as best I can measure. The original lock fell into the door frame ... (cont.)

I need a tilt latch for a double hung window. The dimensions are 1" wide, 2-3/4" long, and about 5/16" thick. The screw holes are about 1-13/16" apart. Do you carry this part (in almond color) or do you know of anyone who does? This part is off a 'CareFree' window.

I am interested in purchasing Dual Roller Assembly, 1-1/4" Steel BB Product Code: 81-158, however the one I have has a 1.125" roller instead of the 1.25, will this fit?

Two of my channel balances broke on what I think are Quaker Pamela windows. They are 35" long. I need four replacement balances They are stamped 3490 BSA RV 33.

Can you help I D this past

7 inches probably over 40 yrs old DNS Industries Miami Florida stamped in lower right side JAPAN It looks like the one posted 12/18/12 by David

Attached is a file with two photos of a wheel assembly I am trying to find. It is in California from the 1960

I need an expert to show me what to buy. Mine measures 28" long (metal part only) and 9/16" wide. That's all I know, because I don't quite understand the numbers printed on mine....