Viewing all customer Discussions for:

Door & Window

The lock to window is broken NUPRIME BY SEASON ALL PATENT NOS. 3.449.882 D 209.812 - D 215.676

Hurd entry door. Door is metal clad. 1 3/4" thick. Weather strip was stapled in place. Inside edge goes around the dooe edge 3/8". The stripp has a bubble on the inside edge. A fin in the middle. And the outside edge appears to have had a bubble. I will attach pictures. Ron

Sliding glass door lock installed in early 80's looks just like your 82-055K Keyed Handle Set by Acorn except my overall measurement is 7 1/2 inches long on the inside piece and screw holes are 4 1/4" centers. Any help you could give me would be appreciated. Nina

I send more or less the description in the pictures. I want to know the 2 Channel balance that I need to buy. The right top for the window The click for the right side (may be I need to change both of them. The high is 31" The deep is 1/2 " The width is 49 "

I have a very heavy safety glass window (I have no scale so cannot give exact weight, but it is much heavier than windows I am used to). The balance will not hold the window up, but I think it was capable in the past - just has worn out. Based on the information I provided, can you tell me the ... (cont.)

I need a replacement for this awning operator. Please let me know the part number. i cannot find any marking or number in the hardware. Thanks

The lock has broken on my patio door and looking for a replacement part. The measurements are 6-9/16" so I think this is the correct part for me. Can you confirm please before I order?

Need to replace two Andersen window balances for double hung window. Markings on pull side are: 11600-2 and 171 5#23 9 81 Markings on opposite side are 11600-3 with US Patent numbers. Thanks Stan

I purchased from your company 1/8 70-086 offset plastic clips, they keep braking for the project I use which has nothing to do with doors or windows. I am wondering if 1/8 or 3/16 offset metal clips are available, I need at least a 100 pieces. Thank you

I have Patriot windows that need new pivot shoes and from your list it seems tobe the 15-121 shoes but I send pictures so you can let me know if I am right before I place a order and also the tilt release left side so I CAN TILT THE WINDOW IN.. Thanks for YOUR Help Frank

Hello. I need to replace the channel balancers on a Milgard window and I am trying to figure out the part number. The old channel has 23 5 AS Caldwell printed on the side. It is 24 inches long (just the metal channel) and .5 inch channel width The sticker on the window has H-C40-54x90. It i ... (cont.)

Hi there, my lock is similar to one you have posted on your site but it has larger mounts on the outside with what looks like a patio door symbol on both ends. It is stamped CD8B inside, and measures 5/8 across the part that inserts into the door (width) and 3 3/4 roughly from each center of the ... (cont.)

I am looking for a shoe that fits a series 385 channel balance. my shoe messures 7/8" while your part# sizes are 15-004 1 3/32" and 15-005 1". Is there a shoe that will work for me or will i have to file the shoe down to size? Thanks Bill

Hello, I am hoping to find replacement operators for the casement windows in my townhouse. There are no mfg names or numbers on either the windows or the operators. Perhaps you recognize the from the attached pictures? If so, do you sell them and how do I order them? Thanks, Rick ... (cont.)

Need the screen track for a 72x80 sliding door bought at lowe's. THe vinyl siding crew took it off to do the wrapping of the door and lost it.

This window is 25 - 30 years old. The window glass measures 24 1/4" w x 24' h. The numbers on the lower right appear to read D37 7#31 12 81. The outside insect screen has 24x46 stamped on it although the screen actually measures 28" w x 55" h. I'll probably purchase 2 balancers, maybe 2 more (dep ... (cont.)

we have a 1985 house with pella patio doors. the spring in the top of one door has stretched and lost tension to the point of sAGGING ON CLOSING AND obstructing the act of closing. it is probably a 3 1/2 or 4 ft spring origenally, do you have these? local pella store not real helpful. thanks for re ... (cont.)

I have a broken tilt latch that must be replaced. On kinco double hung windows that were installed around 2004. Can you ID this specific part...also any advice on removing broken latch and installing new latch would be great. Thanks!

Hello, The lock pictured fits inside a surface mounted handle. It is 3 inches long (measured from the centers of the screw holes) and 3/8 inch deep. The second photo shows it inserted into the handle housing. Do you have a replacement for this?

I need two of these. The Anderson part # is 1997310