Viewing all customer Discussions for:

Door & Window

Everthing matches except the number? The number on my part is 24-3 J will the S377-25 option 2430 work on my window? I also need parts for PGT windows are these part numbers right 1820,1210, and 1720 cb? I got the number off the channel balances. And they measure 18 3/4" x 1/2", 13"x 1/2", 18 1/ ... (cont.)

Our door handle looks the same as the 82-013, only the installation holes are 5" apart as opposed to what is listed: 3". What do you suggest?

These bearings are used on windows by several manufactures so I am not sure if these bearings will work specifically on a Continental Aluminum window. Try to match up your bearings with the photo on the 36-018 product page.

Hello, Does the whole Channel come comeplete with the "Cord" & "Terminal Clip" complete, as well as the upper a lower Top & Bottom Guide ? The Channel is stamped "2930" ~~Thank you for your help, best wishes, Joe

my doors use the 84-028 (plastic) assembly. will it interchange with the 84-075 metal assembly ? thanks gene

Yes, SWISCO product code 84-028 and 84-075 are interchangeable. As long as one of these sliding insect screen door rollers match up to your original sample you can use either style/material as a replacement part.

Does the 39-155 have any installation tips or instructions?

What is the weight capacity for the Series 206 balance with a 20 inch tube length?

All the measurements between the two pivot lock shoes are the same except for the thickness. The 15-119 pivot lock shoe has a 3/4" thickness while the 15-120 pivot lock shoe has a 13/16" thickness.

The "2" may indicate that you may need option 2820, this will carry a window sash weight range of 12 through 16 pounds; The "D" may indicate you need to choose option 2840, this will carry a window sash weight range of 23 through 28 lbs. Remove the window sash and put it on a scale, if these ... (cont.)

Hello, 84-091 appears to be part from my screen. Actually door never did work smooth. I had rescreened and while re-inslling noticed adjustment skrew on one roller spins freely. #1 What is the problem if adj. skrew spins freely without tensioning the roller? #2 How does one remove part 84-091 from d ... (cont.)

The 40-117, Inside Latch, is not available in a puddy color.

Is 90-090 thinner than 90-006?

Does this unit use a set screw? I am looking for a crank in white, approx 7/16 diameter hole (spline?)that does NOT use a set screw. I know some of these just snap on, eliminating the old problem of set screw-caused damage.

I recently purchased the Internal Latch Patio Door Handle to replace the oldie from the 60's. When placing the keeper flat against the edge of the door with the hook inside the opening it is approximately 1/8 inch short of alowing the latching mechanisim to engage the catch. From the top of the kee ... (cont.)

can i use your metal cranks to replace the plastic cranks in my storage barn?

I need to know the correct spline and screws. I am planning to purchase 3 wickets.

Yes, the 39-109B is interchangeable with Pella 0C080001; it will fit your casement window operator.

I just wanted to thank you for my order (I had ordered this part and a couple others). I had a local glass company come out and estimate $250 to fix my door because I could not find hardware for it at Lowe's or Home Depot. I was able to get all the hardware I needed from you guys for way less!! ... (cont.)