Viewing all customer Discussions for:

Door & Window

Vinyl pivot shor

hi, Thank you for considering my inquiry. I'm looking to save some old school casement windows by finding replacement turn cranks. Please see photos.

I don't see any markings on the springs.

Hello, I am in need of approx 50 window corners as shown in the photos. At the corner, there should be a small flat lip to make the measurement 1 inch. Any help is appreciated.

The sliding glass doors are on a home built in 2000.

I have a window that has a bar that can open and lock the window. It's mounted on a pivot joint so it can rotate freely. Used on an awning window.

I installed Viking windows in my house 1999 -2000, 25 yrs ago. I need a few sash spring balances to install so our windows hold open. I took a few pics. It was hard to hold tape measure and take a photo of the length dimensionThe part wanted to pull / slide on my granite surface. I shouldve tape ... (cont.)

All I know is that the windows are in the basement window

I need to find the replacement for the following. It is stamped 21 12 OJ BSI. This is for a 48x48 window thats weighs prob around 30 pounds im thinking.

I need to know which crank to order. The windows were installed in 1989 and the crank seems to be stripped. No numbers or identifying marks.

My window balance is about 25 years old. There is no colored tip. I need to purchase four balances. The weight of the sash if 18 Lbs. He series and length are in the description. Please reccomend which one to purchase. I some other items I want to order but I will wait foryour reply to make the comp ... (cont.)

Channel Length is 26.75". Stamp reads 2640 BSI NN. Don't know window manufacturer. I need 4 balances.

Hi, I am looking to identify and purchase some replacement awning window openers. I have attached some photos. Approx center-to-center dimensions: Top holes: 0.45" Bottom holes: 1.3" Top-to-bottom holes: 5.2" Both arm lengths: 2.5" Arm pivot hole: 0.275" The only markings visible are "Pat no D-198 ... (cont.)

Iam looking for winged channel balance cmc

I have a metal exterior front Stanley #28915 door with wood bottom to attach sweep. Swri # is 98038-05-01. Size is 36" wide x 1/34 " thick. I need the decorative plastic that goes around the window

Need replacement springs for traco window

Hey! I've got white vinyl windows. The hardware on one piece case said truth 30866. On the slider pieces, I can't decipher the number on the piece, it seems like it could be 33177 or 35177 or even 33170 or 35170 or something of that sort. My tenants have fully broken one set of hardware to the point ... (cont.)

hello, we recently bought a home and they removed all screens to power wash, however I don't think the windows were reinstalled correctly. We're finding some of the channel balances missing altogether and are looking for replacements and we want to make sure we're getting the correct part. markings: ... (cont.)

Hi do you have this kind of hardware its on the photos1/2 wide 35 long and 7/8 outside diameter

Length: 21.5" Stamp: 21 9 Manufacturer: Milgard Count: 2