Viewing all customer Discussions for:

Door & Window

Hello. Need help with replacements for this window balance. Thanks jeff

20 year old screen door 1 inch diameter roller is spring action. Top rollers are missing. Would like to replace all four rollers so door works perfectly

I am looking for these balancers. One pair is 20" and the other is 23" (measuring the white part only. If you need more info I will do my best to get it to you.

House was built in 1986. The corner pieces that keep the screen or storm window in place need to be replaced.

Hello,I am trying to locate clear plastic pins to secure our window grilles. Unfortunately, I cannot find any markings on the windows, grilles, or pins, except the metal on the inside of the double-pane windows says Clawson. I have attached a photo of the pin, by itself, and in the notch of the gril ... (cont.)

I am looking for tilt window pivot pins that fit your coil balance shoe #15-177.

Our doors are metal double panel probably 40 years old. The roller assembly may or not be original and the doors are extremely hard to open. Track is ok. Can we just get a replacement roller or maybe just the whole sliding door without total replacement. Rollers don't seem adequate since they only h ... (cont.)

Hello, I purchased item 18-042 date placed 2/23/24. total of ten from your company.Unfortunately, they are to small. I have included the one I purchased (which is in the plastic)and the pictures of the sashes that are currently attached to my window. Two of those to my bedroom window broke.I need to ... (cont.)

Hello. I tried to email ya but I didn't get the pictures uploaded. But I am sending you some pictures right now. Let me know if you have something like this. Thank you. James.

Need a replacement for the pivot bar. Windows were installed in October of 2005 by Regency Plus. The decal states they are window pro. Also need replacement for metal bar that is in the bottom of window that goes into the pivot bar.

3-1/8"- bar The springs say 5 on them

No markings

Could you please help with the parts I would need to order to replace the broken pivot assemblies. Also, if there are any instructions on how to replace the parts.Thank you,Gary

Not sure if this helps but this is the info located on the stickers inside the windows. ANSI/AAMA/NWWDA 101/IS H- R25 - 96 RP SERIES: 40 - 06/40 - 17SH 4766858/02 Unit: 35.5000 62.5000 4?? 4EB4EB G1: 31. 5000 28.6875 FCSH Norandex, Inc. /Valparalso 94 Simonton Windous 0308122056 8/13/03 F0285 812 ... (cont.)

How do I replace a Simonton window screen L shaped latch? I have a new latch. Thank you, Jeff

Sterling Windows 2001 Believe i need 4/windows x 2 windowsTube's are 5/8"Tube is 24" red/orange tip

The longest bar has the number 358-3, and the shortest (to left in photo) is 358-2I also need the part that mounts to the frame, because the pin that fits the 358-2 bar is missing.I am not sure, but I think there is a difference between the top and bottom frame component.I will check further then ne ... (cont.)

I need help

The tab that fits into the window frame I guess you would call it. The window release has broken. Am I able to get a replacement part?

Eagle Window - Balance Springs - stamped G0432HD No measurements available right now but was hoping the photo with the window specs/info might be enough. Can send pics measurements if needed - just can't open windows for a few days here (rain and snow). Thank you