Viewing all customer Discussions for:

Door & Window

Hi there. I need to replace these parts on 4 windows in total. Please advise. As you can see on the picture the mechanisms are completely ripped off the original opening. I can send you more pictures if needed. All together I have 2 right hand windows and 2 left hand windows. Thank you! ... (cont.)

Both clips have "SA" marked on the inside with a triangle symbol above the letters. One has the #1 and other the #3 on it.

I need 8 Channel balance to replace my 29 inch channel balance labeled 2890 40

I'm looking for the specialized screw that goes into the mechanism as well as the plastic bushing also I need the snap in Window glazing caps I think I can find the screen retainers but if you have those ones, I could use those as well

I need to be sure I buy the right window latch for my windows. I have markings on the window to identify the Manufacture.

This is for a twin casement

I am looking for replacement screen door rollers as shown attached. They are 1" in diameter and 1/4" wide. They mount directly to a screen door and roll on a track in the "v" groove of the wheel. I am unable to find them anywhere.

Any idea? Thank you

Between the windows, "Sungate" is stamped on the lanes. The glass is Herculite.

Unscrewed this Sash Lock trying to remove it but it remains attached to window frame. I think the locking mechanism is still inserted into the keeper. When I push the handle, there is no resistance. I cannot open the window. How can I remove it?

I'm looking for this coil balance for a tilt window it has the #10 stamped on it

I need 4 sets of hardware for RB PD 6068 DP50 Low EBBG RH Model # 719801243997 Sliding Glass doors

replacement glazing bead needed x2 white

I am trying to fix the shoe. I bought the one in bag ( part 15-192)but it is the wrong thickness. I need only 1/2 inch. I thought it was correct because of the hoke on side to screw the coils to. Do you have another suggestion.

Hello, Looking for Anderburg Hinges 12" 301 Series. Do you carry them? Need 4 of them.Thanks, Cynthia

Hello, I'm planning to install the SWISCO 39-139 Single Arm Crank Operator and need to purchase 4 screws for the installation. Could you confirm the exact size and whether these screws are available in the same bronze color as the operator? Additionally, do you sell these screws or can you recommend ... (cont.)

Bright white window Camlatches, left locking with Alignment Lugs. Mounting holes are 2-1/16" and 11/16" for vinyl clad double hung windows. The latch mechanism has a 680 stamped on the back I am a remodeler and homeowner here in Boise ID area

This is a photo of one of the upper corners of my window. Based on my reading, I was expecting some sort of a latch release to allow window removal but I see no such things. Can anyone identify how to release my window from its frame from this photo? I'd certainly appreciate a breadcrumb or two. ... (cont.)

Hello, I am looking to replace this sliding door handle with one that can be locked and unlocked with a key. Do you have a keyed replacement? Thanks, Paul

The part is from a door that is at least 20 years old. It is a metal slider with no identifying information. Both the front and rear rollers are faulty.