Viewing all customer Discussions for:

Door & Window

Sliding window hardware 171391

Looking for the swivel knob for these window cranks. See photo of crank with knob, and crank without knob. I need the missing part. The mounting hole is 1/4 inch diameter. Thank you very much.

Do y0u have these balance rods?

It's a 1/2" wide (actually measures 9/16") x 13 1/2" long channel balance. It's a Milgard window.

Hi, We think our patio glass sliding door is by Silverline. It locks but sometimes will not unlock, so we need a new lockset. Hopefully you can identify it and have the lockse. It was installed in 2014. Thank you, Eileen

30 in long and 1/2 in wide

I need 6 of this part or an equivalent please. They appear to be cast aluminum.

We have a couple of windows that don't stay up - the fall down with no resistance.

Need crank for casement window left hand I think it opens on left side from inside

I have ordered from swissco before I am hoping you can help me again. I need three replacement parts- 1 for a white screen door and 2 for 2 separate sliders.

Please see photos and let me know if you need anything else. The parts are identical, except for the length. I need 2 of the 1420 and 6 of the 2630.

I'm looking for a channel blocker & trackell(pat 6598264) 14-2 for my windows and wanted to know if you may have this part. I have different size I will need to order.

We are missing the piece(bracket) that holds the door and locks it. The space between the hooks when closed is 4.75".

I need to locate this Hinge. Please reply me by an e-mail or phone number

I'm seeking a replacement balance. My shoe is not 1 inch nor 1 3'32 inches in depth for the bottom shoe.

I am looking for 4 window hinges from Anderson flexivent windows from the 1950's.

though the wheels work relatively well when I clean them and reinstall, they get stuck as soon as I put the door back on the rails b/c the wheels are not secure and therefore the height is lowered. I believe that this is due to the cavity on the bottom door frame (seen on top of the glass in the pi ... (cont.)

Length top to bottom 2" Width 5/8" Top 1 9/16 x 1

Hi! I am looking for this replacement part for a door. I believe it's an Anderson sliding door. I need this entire piece replaced. Thank you for your help.

Channel balance sticks in down position, won't retract. 1/2" width 32 5/8" length 1 1/8" shoe width Wings on both top and bottom clips Sash weight is 20.2lbs Stamp reads 32 3 BS1