Viewing all customer Discussions for:

Door & Window

I need a sliding door center spring mech lock assy

I'm looking to replace this window lock. Can you help with the information given? I can give more

There are two Left side 45° opening windows and two Right side 45° opening windows

My name is Chris. i need to buy a replacement mortise lock for his door. Is this a swisco lock? If you need measurements let me know. Owner sent me pic. Ty Christo ps havd a bless day.

The Color of the latch is brown. Both sets of mounting holes that accept screws are 2 1/16 inches wide. The depth to the latch face on the piece with the lever is 7/16 of an inch. The mounting holes on the small piece Or 2 1/16 of an inch wide and 5/32 of an inch deep I would like to get three of th ... (cont.)

Plastice with 2 screws. Measurements on screw eyes are 1 5/8" approx center to center, 2 5/8" body length, 3 3/8" totla length, 5/8" width

Hi, I have a single hung non tiltable window by Millard with a failed balance. Part number is 26 5 FR from Caldwell. Can you help identify the proper replacement. Need both sides. Thank you.

I'd love your help identifying this part and allow me to order a replacement. Facing the window from the outside, it is on the left.

trying to locate 4 replacement closet wheel assemblies. 15 + years old

No markings on our sliding glass door, looking to replace the reachout latch (see attachments). It has a simple, slotted receiver that is mounted flush to the door frame. Latch is marked "DNS", but no part numbers. Thanks!

Need to replace 2 left hand window tilt latches. Jeld-Wen double hung windows about 16 years old

I'm looking for replacements, or a fix for my casemount window cranks. Here are some pictures. Found a number on one, hoping it's a part number. Truth is stamped on parts, I think the u a 9 inch arms.

The coil broke on both sides

Can someone help me find this glazing bead

I had ordered this 28" Series 795 Channel Balance / S795-28 - which right size but the connection pieces are not. The pivot shoes it too large to turn in the channel and our installation requires a hook connector at the top. Pictures included. Can you advise of the correct replacement part(s). ... (cont.)

Gears are stripped out on crank.

Not sure what this part is called

I need a replacement cover and handle for a Milgard Hermosa casement window. See attached photos. Do you have these parts available?

5/8" x 29" I have 3 windows to start this size Thanks for your help

I have two Lawson Industries LI-613 Series SH-7500 aluminum single hung windows which need replacement channel balancers. The windows are 36" wide by 62" height. The bottom pane weighs 14 pounds. The channel balancers are 1/2" wide and have the following identifiers: 2920 NL BSI. ... (cont.)