Viewing all customer Discussions for:

Door & Window

The metal channel is 23" long. Thanks

hi my name is Jim.the gear part seems to be stripped on our Jeld-wen awning window.marked on the window JEL-N-201Caradco is on the handle.Truth is on the arms.it's a 2 arm setup.probably need 2 new arms - due to threadsthe operator and handle -- as the handle is one piece.see photos.also .. I can't ... (cont.)

This is what was printed on the channel balance (spring) for my aluminum single hung insulated window. The channel is 5/8" x 5/8". The length of channel is 27 7/8"and the overall length with the plastic ends is 29 5/8". The vent is approximately 40" wide x 29 1/2" high. Do you have the channel ... (cont.)

Hi need help finding this part or something that can be compatible.

I need the whole assembly new

need a replacement handle These are the numbers on the handle itself DNS 13/23 outside pull

I have two broken window cranks and I cant seem to find something that looks similar the part says OP05-2018 do you know what I can use to replace it.

I have a patio door that was probably installed in 1978 and the rollers are not rolling anymore. I have removed one of the rollers and attached a photo of same. It is 15/16 tall, 1/2 thick, and 1 3/4 long. Concave wheel is one inch diameter.

Hi there. I'm a General contractor in Durango Colorado. I'm looking for replacement options for the slider handles attached below. Please see pics attached

This is a circa year 2000 Windowmaster purchased from Home Depot and installed by my contractor. Looking from the inside, the crank is on the left and the window pivots out opening on the right. The part reads Entrygard and on the bottom there is a code 40754

I'm seeking a window keeper for the handle in the attached images.

Looking for replacement sash locks for brand "PROVIEW"

These are for Certainteed windows

Looking for replacement hardware.

I have 6 Simonton windows that need new coil balance assemblies. They are all single hung 3 coil - and the moveable pane is ~ 18 pounds. The photo shows the current parts. Each has 2 coil assemblies. Can you share part #s to replace ? Thank you!!

I can't find any ID on the windows at all but they are 37 year old black painted aluminium. I'm guessing these are a 390 series but I'll leave that up to you. There's also what I think is a newer channel (same length, same ends as the others) that says 28 1/4 AK Caldwell on it. The metal channels ... (cont.)

Hello!The mechanism in my window has broken in two places (equally on each side), in what seems to be plastic pulley type pieces? There is a metal channel on each side of the window that has 27TGX on it, and contained a long spring on the inside. The string inside the window channel is loose and wil ... (cont.)

Good day, Do you have this in stock See the dimensions in mm in the attached foto's (3)

I need some replacement balances for Millard windows. The stamp says 25 5 BSL PE

weather has deteriorated the strip and has pulled out of the 2 channels