Viewing all customer Discussions for:

Door & Window

Do you have any of these for sale?

So these shoes are 3/8" x 1" x 2". I ordered the 15-045 and apparently to bar does not fit into the pivot shoe. It is 1/4". The opening aon the actual is larger. So i need something differnent so the shoe will accept the bar. The bat on existing is 1/4" but does not fit into the 15-045. It is 3 1/4" ... (cont.)

Trying to find replacement part

The channel balances had come loose and were sitting at the bottom of the window on each side of the window frame so a picture of them "installed" was not possible. The measured length of the metal portion was 30"

Does that clip help it from going side to side? Because I'm missing a couple of them in each window.

Can you tell me if you have cranks that replace the broken ones. The two with white paint on base are for long Bay windows, all are casement windows.

Hello, I have a 30 year old heavy aluminum tempered glass patio door with damaged rollers. The rollers are made of steel with 1.25 inch wheel diameter. There is a roller with one wheel on each side of the door. The dimensions of the housing is 2.25 by 1.25 inches, 3/8 inches thick. There is a recta ... (cont.)

american craftsman 70 series, what type of balance coil support are those?

Attached are the photos of the window parts I need. These windows are probably from the early 1980's aluminum windows. Plastic car slides into the window channel and screws in with metal wheels. The plastic car is 11/16" wide x 1-7/8" long, The thickness from the bottom of the groove that catches in ... (cont.)

I have a double glass sliding door (both sides can slide). The handles have JW imbossed it them (see pic). One of the levers to lock the door (from the inside - there is no key from the outside) is broken off. I could not re-attach this lever back as shown in the 2nd pic. I can put back the leve ... (cont.)

Hole-to-hole (screw spacing): ~6.5 inches Total plate length: ~7 inches

I don't know what type of keeper that is similar

Is there a way to replace this worn out rail for an aluminum patio door? Looks like its about 3/16" wide and I will need about 6 feet of rail.

Lookimg for a replacement.

where can i find this part in local stores

We think the part we need is : Product Code: 39-239C SS Encore Awning Operator, Sill Mount $52.20 But we want to make sure before we order. Can you verify with the photos attached or can we provide any more information? We could not find any part number or model name on the hardware. ... (cont.)

Need replacement latches for 6 Norandex windows. Thanks

Bathroom window

Trying to find a replacement awning operator for my window. Gear does not engage worm screw properly to move window out. Andersen does not show a replacement. Has number C-1081-101 on crank and S-1081-65A on arms.

I have tilt windows that are approx. 25 years old. I purchased the house a few years ago and its clear that there was no maintenance done (i.e. the sash pivot bar has rusted and broken off into one of the pivot shoes). Some windows do not stay open at all, while others are difficult to open and clos ... (cont.)