Viewing all customer Discussions for:

Closet

Hi I am looking for a replacement roller for a mirrored closet door roller is approx. 1 1/4 in wide and the roller assembly is approx. 3/4 in wide by 2 1/4 long the assembly is flared on top to slide into a track on the mirror frame and there is a slot for a screw at the opposite end to the roller f ... (cont.)

Which replacement track do I need? I have Stanley Works mirrored closet doors. The bottom rollers appear to be identical to your 23-041. The original track is 3 7/8" wide and the two individual door tracks are 1 5/8" center to center

I have four of these wheeled glides on two sliding mirrored closet doors that need replacing in a house we just bought. I suspect we need hardware for the tops of the doors as well but the parts are missing. Do you have these glides available? Would you know what the top hardware would be? I appreci ... (cont.)

I have been looking for this part everywhere ... but can't find it

need one of these in the picture. It says Acme on itThanks for your help in this matter.Terry S.

This is affixed to the top of the closet opening and the channel slides into it. I do not know the manufacturer of the sliding door.

Door track

My sliding mirror door roller was not working. I went to our local hardware store but they don't have this kind of roller. The top of the roller was marked as U.S. PAT 5,673,516. I need two of this roller please. Thank you!

Good Morning, I am looking for some steel bifold door hardware as in this picture. I am located in Canada and am wondering if there is somewhere in Canada I can order from. I work in an apartment building where these doors are probably 40 years old and some of the hardware is starting to fail. I ha ... (cont.)

I receive the cap, but it will not fit. I thought I had right size. Please let me know if I can return this and get correct one. Please see attached pic and let me know what I need. I also order your 21-111 and that was just bit small and it would not fit. I have return both back. Lets try 3rd time ... (cont.)

The plastic piece slides along metal track under the sliding doors. I need 12 of them.

Hi, I'm looking for a replacement part for mirror folding closet door. Specifically, I'm looking for a replacement bottom pivot pin. It appears that the closet door hardware parts, and perhaps the closet doors, are made by COX USA. From my Google searches, I think I need COX USA 26-055. Do you offer ... (cont.)

My three-year-old son pulled very hard on a bifold closet door and bent this screw. This inserts into another piece of hardware that runs along a track. Any chance you know a replacement part?

Top of second bifold door to slide in channel

2 pics of the same pivot pin. 5.25" tall, 1/4" diameter. Several of these pins appear to be missing the bushings and retaining clips. I could really use some help to identify this pin and I'll need several bushings and retaining clips. Thank you! Lee S

My slider guide keeps falling out and I am at a loss at to how it should be re-installed. Thank you.

Greetings, I am looking to replace all the hardware on my aluminum bifold doors. The doors are 24 wide and 94 length. The track is 1/16 less than 3/4 inches wide. Attached are some pictures I hope help.Many thanks,Chirag

My sliding closet door track was damaged. There's a marking on top that said: U.S. PAT. 5,673,516. Please let me know if you have this kind of sliding closet door track. I need two (2) of this parts. Thank you.

Sliding closet door top roller assembly

What is the width of the channel the roller goes into? I want to be sure the rollers will fit in the channels. Thanks!