Viewing all customer Discussions for:

Closet

How many holes are drilled into each 3' track?

These doors are 25+ years old still in good condition except for the hinge hardware would love to find replacement parts Fenestra Incorporated - Detroit, Michigan U.S.A.

this is a mirrored bifold closet door. when having the floors replaced half of the bottom rail got lost somehow.its 24in long and basically 1 inch square.something 48 in would be fine.thanks

Hello. We are replacing the pocket door roller hardware on four oak & leaded-glass doors of a large opening. The pocket door hardware utilizes a double J-hook channel and triple plastic rollers with steel ball bearings. The only identifying information on the roller hardware is a US Patent Numbe ... (cont.)

I need a part like the one in the photos for the one side of a bi-fold mirror door. It appears that the part has a plastic knob on a spring that goes into the top track. This part is on the side that pivots to close the door. The bottom of the part is inserted into a hole in the door and there is ... (cont.)

Looking for Contractors Wardrobe Glass Door L Shaped piece of metal that holds frame together or piece that can used.

Cannot figure out how to temporarily remove my mirrored closet doors from their tracks to work on closet interior Am an older lady and unfamiliar with this operation. I've tried unscrewing the only (top) screw I see in the bottom assembly, but nothing gives enough play to remove the door up and ou ... (cont.)

I need two pins to replace the one shown in the photos, please. There is no identifying information on either the bi-fold metal mirrored closet door, or these pins. Approximate dimensions from the drawing are: Metal threaded pin: A) 1.15" B) .183" C) .183" D) .825" E) .262" F) .230" ... (cont.)

do you have a 3 door track system?

I need the bottom left side of door if looking from the back of mirror

I need to get for replacement wheels for our mirror sliding doors there are no part numbers or brand names at all on the doors.

one panel is sagging and is dragging on the bottom track. Was told it needs a new pin that will raise the door and lock it in place

The only accessories I have are the rollers on the door which are about 1 and a half inches. What track do I need and do I need and attachment for the other end of the door

would like replacement parts for stanley 17-4405 here are a few pictures showing top and bottom views.

kindly assist in replacing the rollers i've provided.....

I need both a top and bottom guide post assemblies for a National door which uses your part no. 21-113 guide on my track. Please include springs, clips and installation diagrams. Joseph W.

Hello. Wondering if you have this part or something newer with a roller which would work.

This looks like what I need to replace, but how do I remove the old one? It appears to have a plastic piece that is glued in place. Any suggestions?

I have a set of old closet doors. The rollers were kind of worn out. I'd like to seek for replacements. I tried to measure and draw the dimensions. Hopefully those files make sense. Thanks a lot. Amy

missing or broken hardware from a set of louvered metal bifold doors