Viewing all customer Discussions for:

Closet

I have an Ace sliding door roller that I need to replace. It looks and measures exactly like the 23-043 but the flare is only about 5/8" wide. Would the 23-043 work?

this roller assembly on the sliding mirror is attached without any screws. Do you have any that can be attached without screws ?? if so what is part number need to see a picture. 23-041 is not exactly the same as i have on the mirror sliding door.

I am replacing the flooring in my home and am looking to replace the floor track for my mirror closet doors.I have attached a photo of the existing track. do you have anything similar to this?

Good afternoon, I am a multi-family facility owner and have a 200-unit complex built in 1978 using Benchmark, steel, bifold closet doors. We have found the replacement pins for our normal supplier, but have not yet been able to find the track. It appears they used 36" tracks with a connector on a ... (cont.)

Thanks for posting. This looks very similar to our 23-161 4-wheel pocket door carrier. Please take a look and compare its dimensions to your own hardware. Do you think this would act as a replacement?

I recently purchased your part 23-242 bottom track. I have concave wheels and the track calls for convex. Pictures are attached of my current ones. Any suggestions? Than you.

Hello, I am having trouble trying to locate the correct hardware for my metal mirrored closet door. Attached are a couple pictures of the hardware, the wheel diameter is 1-1/4". Any help would be greatly appreciated. Thank you, Richard

Would you please help me identify if your company offers the roller replacement I need to repair my mirror closet doors? I have attached 4 photos of the roller I need. The roller has the number 4012 stamped on the inside of it. Thank you Albert

Do you have this pocket door flush pull in Chrome or nickle? Product Code: 22-027

I have a closet doors manufactured by Monarch Mirror Dor Co., Chatsworth, CA. I am in need of a bottom track that is 6 feet long and can't locate it. Any ideas? Thanks

The posted photo from a 1970's house. All double doors. Offset looks like 3/8", length 2-1/2", roller dia 3/4". Marked "Kennatrack" and has a capital "B" with a circle around it. Can you help with a replacement part? I guess the alternative is to get a new track and roller set.

I have Full Vu folding doors Leigh with a stamp on the inside that says Leigh Prod 5702-2. I think they are bottom pivot. Looking at your catalog it looks like I need six of the 21-054 and two of the 21-048 or two of 21-051. What do you think?

trying to locate a pocket door guide like this. Please help. Thank you.

I am interested in using your one-piece closet door guides. The doors are 1 3/8" thick and are in carpeted rooms. I think I need item #23-209B. Do I need to use a carpet riser with the guide? If so, which is the best one to use with this guide? Do the holes in the carpet riser match the holes in the ... (cont.)

I've been everywhere looking for this part and I cannot identify it.

Hello, I am looking for a floor track to install on regular sliding closet doors. The door thickness is 1 1/4,the lenth is 48 inches. Do you have any floor tracks instock to do this?

Can you recommend a replacement for the rollers shown in the pictures attached. The rollers hold up doors which are heavy. I think the offset is 1/4 inch.

I found the pin cap (21-100) but, I can not find pivot pin bushing.

Monarch mirror bi pass doors Wheel diameter 1.5" Bracket 1.75" wide x .5" thick Overall length top of bracket to bottom of wheel 3" If not the bracket with wheel maybe just the nylon wheel with metal ball bearing hub. These doors are 30 x 78 and weighs 52lbs. There are 4 door with 2 wheels on ... (cont.)

Are These guides as strong as the original ones? I had gotten some from an old established glass store in Lancaster, pa But they broke into pieces when installing them. As if they were old an brittle