Viewing all customer Discussions for:

Closet

what are the limitations of the 32-064 hinge?

What colour the 22-017? It looks like a brass or copper colour in this picture. I need a silver colour.

The 23-136 is a standard hanger for doors up to 125 lbs. The wheels are not ball bearing. The width of the center of the wheel to the center of the wheel is 1-7/32", take a look at the included image.

We recently remodeled a home and had to build a header when we replaced floor-to-ceiling bi-fold closet doors with sliding doors. We knew we were purchasing a high stack carpet (frieze), so we built the header a little higher up than the measurement so that the doors would slide easily. However, now ... (cont.)

The overall hinge width of the 26-401 closet door hinge is 1-3/16". Take a look at the attached photo of the 23-401 door hinge, I included a few other missing dimensions.

the part i am trying to replace has 3/4 inch wheels. And the 7/8 inch spacing on the wheels ... is that center of wheel to center of wheel or outside to outside etc (pn 23-138)?

will the 32-064 hinge work on a door that is 2 inces thick?

Does the 21-001 rod end have a philips head adjustment?

SWISCO was unable to locate a 1" offset for this style closet door roller.

There is not an instructional guide available to replace the Full-VU hardware. It is important to pay close attention to what and where you are removing hardware so you can replace it in the same manner. It may help to take photos before and during the removal of hardware, to have a reference to i ... (cont.)