Viewing all customer Discussions for:

Drawer & Cabinet

Hello, im trying to find a replacement for a back rail anchor. I've attached a photo.Any help would be great. Thank you, joe

The slide rail has a number of 11-06 but no manufacturer name. We need the part that is on the bottom of the drawer

Looking for rear draw slide bracket for a vanity - the side is 4 x 1 3/4 with a one inch wide channel to hold the slide - screws are extra wide and built in to plastic

I picked this picture off of the internet and it is an exact match to the part I need. The picture was linked to Swisco.com. So far I have been unable to find the part on your site.Your help is appreciated.Thanks,Les

I need to find a replacement bottom left side. It is from a Quality Company Kitchen cabinet. Quality is the name of the company. The only makers mark I see is a "G*" but it's a 6 point instead of 5

The spacer we have on a Merit cabinet from 20 years ago measures 11/16" Do you carry a part that will work for our cabinets?

I am looking for a replacement to a part I'm calling a plastic drawer slide. They are approx. 1 3/16" long x 1/2" wide x 1/8" thick. The drawer appears to rest on this slide and provides a smooth glide with opening and closing. There is one on each side of the drawer and it also appears that it keep ... (cont.)

Tan in color, 1-1/8 wide disk, 3/16 thick. There is 1 small brad in the center that holds it in place.

Need help

Slide is 1 3/4" high, slightly less than 1/2" wide. One slide on each side of the pull out drawer (four total). The bottom of one existing bracket snapped out causing the drawer to fall. Accuride slides. 23" long.

I recently ordered this product to repair a drawer. While it has improved the functionality of the drawer, the drawer still moves from side to side and gets stuck. It seems that the rear guide isn't quite enough. Is there a similar product that can be attached to the middle and/or front of the drawe ... (cont.)

Looking for this type of drawer guide. 7/8" spacing between tabs.

I have looked at your dimensions on 32-018 which handles a slide 7/8 inch tall and 32-089 handles 1 inch slide. I need 1 1/8 inch for my slide to clear. Is there a brace that will handle that?

I am seeking new brackets for the above Merilat stopped making them years ago !! Your parts look like they are what I used to purchase

I have the 32 081 sockets and they are all broken and need to be replaced. Can I substitute with the 32 082 sockets without getting into any other issues? The bottoms of all the sockets are broken off and was wondering if the metal surrounding the socket would make them less likely to break. ... (cont.)

Where can we find replacement for this piece? Ro Thor was written inside. No numbers listed.

a socket for a very old drawer slide. There are no numbers or other makings on any component of the drawer slide.

Your 19-5/8" drawer slide appears to fit my kitchen drawers perfectly, but the cabinet box requires a 22-7/16 inch cabinet member slide for the drawer to go into. In other words, there is a several inch difference between the drawer size and the cabinet depth. The original slides are Grass 6600. ... (cont.)

The Kenlin drawer part as posted is broken. How do I locate a replace part?

Our drawer broke and we need a replacement part! Thank you