Viewing all customer Discussions for:

Drawer & Cabinet

I am a Project Manager over at Hyperbuilt. I was told that you might be able to assist me in locating a Cabinet Rail Slide Support that I can't seem to find anywhere ? photos attached. I have photos of the rails as well if you need those?just let me know. The homeowner has been patient thus f ... (cont.)

Trying to replace thid part rear plate of center mounted drawer slide in a mobile home

I'm looking for these Blum cabinet door hinges #70 259 made in Austria. Thank you, Mickie

Hello, I'm having all the cabinets in my home painted white. They are currently a dark brown, faux wood grain finish. The issue is the painter does not feel comfortable, patching old holes and drilling new ones to replace hinges with newer ones. I'm trying to find the same hinges as the ones in the ... (cont.)

Very similar to your part number 32-040 Except the roller is on the opposite side.

Small Side Mount Drawer Slide Pair, 12-3/16" Product Code: 32-223 https://www.swisco.com/small-slide-12-3-16/pd/Other-Drawer_Cabinet-Replacement-Hardware/32-223 do you have these slides in any other bigger size? looking for about 14" or 15" Thanks

This part holds the back end of the drawer side guide to the back wall of the cabinet.

Customer is looking to purchase a Complete Drawer Track Set that he purchased a few years ago that is featured in this video. The Product Code is mentioned as being 32-063 however when searched, it no longer pulls up any parts. Was this kit discontinued? If so, are we able to put together an order ... (cont.)

Hi, I need to replace the plastic drawer guide on a couple of drawers . The part is marked Reiss Mfg. Corp N.Y.C. R-26 Pat. 2857233. I need 3 replacements. Could you please inform me if the part is available and place the order for me?

I am looking for a replacement Merilkat side drawe slide with the L shaped end. Do you know where I can find one?

Hinges are for my cabinets on a 1989 Sea Ray Sundancer 268 MSAS ZD240 Are the markings on the hinge

I have htc 533 drawer slides and most of the soft close dampers are going out and pushing the drawer back out after closing. On the light grey housing it says "HC 12 8" that is the only marking on either part. I would like to find a replacement as it just simply snaps in. The dark grey piston is ult ... (cont.)

Hello, I am swapping drawers from one cabinet to another using the existing hardware including these brackets, pictured, and 21 5/8" slides. The slides are mounted to the cabinet using these two brackets on each side (one in front and one in the back). Using these brackets, the width is about a 1/4" ... (cont.)

Please let me know if you need a better quality photo. I am in need of the part.

Drawers pull out and will not stop. Plastic part on back of drawer does not look broken. What is the part I need to stop the drawer from pulling out for wood center drawer glide. Thank you

Drawer guide

Bracket is 2"deep, slide in slot is 7/8"wide, back mounting is 2" long x 1 1/4" wide The lower lip keeps breaking out and the drawer drops. See pictures attached. Thank you for your help! JPG

I need several of these hinges and cannot find any identifying information on them. Can you help?

Hi -- I have a ~20 year old dresser and the drawers fall down when you pull them out. The plastic pieces seem beat up/broken and the tracks on the bottom of the drawers are also bent/blown out. We bought the dresser used from someone so we don't have a clue whether this has always been an issue or s ... (cont.)

I'm looking for this style of drawer guide(see picture). The opening where the track runs matches your Product Code: 32-088. Would this be a replacement for mine? I do like the style I have because it offers more support under the drawer and on to the track. Please advise. Thank youVictor ... (cont.)