Viewing all customer Discussions for:

Lavatory

I had a dela bypass bathtub door come of the rail and shatter. I thought I had retrieved all of the parts however I am missing one of the "grommets/spacers" (see pictured) that slides ove rthe top of the door and the large rollers are placed over. The delta hardware kit is also in attacjhed pictur ... (cont.)

Need a shower door sweep replacement with distance from end of door to screw of 2 1/2 inches

Greetings, What are the measurements of the magnet seal that is part of the "70 inch shower door magnet seal and end cap unit". Thanks

Does it come in 35"?

Hi, I got a corner shower cabin that I am unaware what brand it is. "tempered 16 cfr 1201-ii ansi z97.1-2004 1/4 ua sgcc 3960" That is all I could find. Can you help me find the part

I believe the 10-325 is what I need for the bottom of my shower door. There are two screw holes on the inside. The measurements are approximately 29 3/4 inches. Is it possible to trim the 10-325 without destroying it so it fits my door?

looking for the part (an end cap or stop) that stopes the glass door from sliding out horizontally off the track.

Hi , Bought the latch set item #10-553 and it's too large. Can you recommend the correct part for me. Thanks, Phil

Hello, I am looking to get a replacement lock for this bathroom door at our church.

I have an OVE Venice 60 sliding shower door 5/16 (8mm) the bottom seal needs to be replaced. It's 31 1/2 in long

Does this include the screws?

Good evening, I am looking for a replacement part for the bottom shower door guide for a Eurolux curved shower door model number 8575-36S. The assembly has a loose turn catch. Documentation for the shower door shows four different parts in the assembly. If possible, we would like to find the entire ... (cont.)

What you ship Item 10-313 Swinging shower door bottom sweep 36"is wrong here are pic 5/32"7/32" to wide.

What part do I need for these shower/tub doors. The guides are completely missing from the shower doors so they swing. Photos attached. The railing/base of the doors look very similar to: https://www.swisco.com/discussions/Shower-door-slide-guides-77-197574 Do I need one guide on each door or two ... (cont.)

Hi I need a replacement for the bottom gliders which have been totally rusted and I believe the glider to which the glass sits on is totally rusted and broken.

30 in shower sweep with drip rail

I need to get a part number/description to order two of these.

I require bottom rollers that match my #10-058 upper rollers, please.

From description I think it is a 10-071 or 10-075,the length of the part that hold the screw is 1 inch in length

I need a replacement roller for my corner shower having a problem Identifying it. Hope you can help.GaleHope you can help.