Viewing all customer Discussions for:

Other

The door is heavy glass about 4 ft wide with a stationary door an additional 4 feet. So the rail is about 8 feet in total. Entire bottom unit is 6 inches wide but the rail portion is about 1 and a quarter inch. The rail itself is 1 inch tall made of hard plastic which is breaking. I can not find an ... (cont.)

These internal tilt latches are 4 1/2"x1/2"x5/16". There are no markings on these vinyl windows anywhere. I believe they were installed in 1996/97.

Kitchen cabinet drawer slide socket.

I am in need of a replacement mortise latch for my Anderson Storm door. Over all height of plate is 7 3/4", distance between top screw and bottom screw is 7" and distance between the two middle screws is 5", width of plate is 13/16". If you can provide the replacement part, please include a total pr ... (cont.)

I bought part number 84-050N which is perfect in everyday except it is 7/16" wide and mine is 5/16" wide. Do you have the thinner one, my door fame is too thin for these.

I am confused as to which one I need. I then overthink and then not sure. I will need a total of 14 and do not want to deal with an incorrect order. Thank you for your help

Looking for what we think is a window latch(1 & 1.2). We are also needing the window latch (2, 2.1, 2.2) itself as well as what we think is the window keeper (will be sending this in another identifying help email with this picture)

Looking for (4) Milgard window channel balances. They are 12" in length. There are no identifying numbers. Attached are pictures. Please advise what model number I need. Thank you. Jason

I am looking for these slide replacements for storm windows. They are for aluminum rolled form frames. Thank you

Spoke to Steve this morning about replacing your existing Milgard handle (on patio slider) to an exterior keyed entry handle. He suggested I send pics. Need advise on which parts are necessary. Thanks you for your assistance.

Hi. I need to replace 2 channel balances for a single-hung window. They are stamped 2320. They measure 24" and are 5/8" depth and 9/16" wide. Please see uploaded pictures. Thank you Charles

I need these roller there for two different doors

I am trying to replace the balances and possibly the whole side track assembly of a number of clad wooden replacement windowsThe plastic receiver has a patent number that is a swisco productThanks for your assistance Cale

This door was installed new in 2004. It has two dual wheeled rollers. There are not identifying part numbers on the rollers. I am seeking to replace these rollers.

Have to replace 28 3 cmc 7 window balancer. (Replaced Atrium). What do you suggest I order? Thank you!!! Jim

I'm looking for several sliding drawer supports. They attach to the rear of the cabinet and the drawers slide along the track. I'm guessing this hardware was installed in 1991 or 92. Please let me know what additional information you need.

I'm looking for dual handles for sliding door, lock not important. Existing screw holes 6 5/8 on center. Flush plate 7/8 wide x 7 1/4 long. Door is 1 1/8 thick. I need a handle on both inside and outside, not just a pull cup, a handle. White preferred, handles can be wood or whatever. ... (cont.)

The first picture is the wheel that is broken. It appears to be from Russia The second picture is the one that is still working. There is still a white wheel on it.

My screen door has peachtree steel rollers at the top and nylon at bottom. Now I need to replace the bottom rollers. The steel Peachtree Patio Rollers looks more durable but for the bottom of the screen door where it will be splashed with rain bouncing from the deck will the nylon one be a better ch ... (cont.)

Looking for this draw rail mounting bracket you manufactured Base is 2 5/8 in by 1 1/2 inch Thanks