Viewing all customer Discussions for:

Other

Left and right side assembly. 1 handle Replace broken trim.

HelloCould you please help me with this patio door lock that needs replacement. It is the main lock and there is another lock mech about 25" above and 25" below. There is no name anywhere on the patio door Thanks for your helpArthur

Need 4

The balancer has the number 2730, and the length of the balancer is 28 inches. Please, let me know if you the replacement part available. Thanks, Pablo

Do you have folding handles that would fit these old cranks.

Hello - looking to find replacement top and bottom guidelines for my metal Bifold doors. Attached are photos from top and bottom currently installed

House is from 1986 old windows. Windows do not stay up. Need new channels. Channel completely broken Part identifier - B.S.I. 26 C Channel length 27" Width - 1/2 " Window weight - 15.5 lbs

I need to replace the mortise latch and thumb locks for 2 storm doors. They both have the same parts, but diff keys. The handles, plates, etc. are fine. Only the latch and thumb locks need replacement. Would rather know for certain about parts before purchasing.

Markings on balance: 29 9 40# 25" LT AR CALDWELL I need a pair for one window.

This is a clip that is on the top of the bottom window on a double hung window. There are two clips, one on each side. The clips purpose is to keep the top of the window from rotating into the house when it is not shut and locked. The clips are spring loaded. The back of the clip has a J, and the nu ... (cont.)

Also need the rail for the barn door.

25 & 5/8ths inches for metal channel length. The stamp is shown on the attached pictures. but what I can read says: 25 9 B.S.I PB. These channels are original with the house, built in 2005. I have many that need replacing. I'd like to order 12 for now and will most likely order more if they work wel ... (cont.)

I am looking to replace the cam pivots in my 25 windows. I purchased one set of 26-150 : Cam Pivot Pair in the metal material but as you can see from my photo, mine are made of Nylon. They are otherwise identical. Would I have any concerns replacing them given the material difference? Thank you, ... (cont.)

Best I can tell, looks like a 26-408, but not sure and hate order to find out they are wrong. Seem to work differently, needed to remove as an assembly vs removing tilt leaver and then remove the latch and spring. Appear too large to be a 26-266 or 267 at ~2.75" long.

I have 1/2inch wide, 30 inch long springs for single hung, non-tilt windows. For some reason the springs have been breaking though the sash cap. I'd like help finding the right spring and sash caps, and some ideas about why that would happen in the first place. There is no stamping on the springs ... (cont.)

I need 24 of these set up like this please.

I need two new glides for a window. the track says 25-4 BSI the other number on one of the parts is 6598264 the part that is broken is the string and the clip.

Can you please forward me the items number or the attach picture? Thank you so much!!

I am looking to replace the operators on my awning windows. What was originally installed was a "lever" type operator, not a crank. Can you identify this?

This is a unigrass 6600 drawer socket. Need replacements and can't seem to find.