Viewing all customer Discussions for:

Other

Hello, I need the mounting plate only for a Traco sliding door latch.

Hello, I recently purchased the window crank on the left in the above picture however it is not compatible with the the I need on the right. Wondering if you have any cranks like the on the right.

Happy New Year! I broke a home window retention spring while removing Christmas decorations. I hope the photos can help as I didn't see any numbers. Please let me know if you need anything else. Thanks in advance.

Hi. The size of the arm on the left is 3-3/4". The arm on the right is 11-1/2"Any chance you could give me a part number, cost, and approximate ship time?Thanks

I believe my windows were made by Kinco. House built in 2003. Actual metal length of balance is 30".

The handle broke after many years. I will need a replacement.

I need the replacement operator covers for Lincoln Windows casement windows installed in 2001.

Hi Swisco, We are looking for this tilt window latch (see pic) but we are not sure the models. We need to replace/buy both models for right & left sides. Could you help us ? We have to buy them Regards - Marcelo

Hello please help me to identify this part stamped 3520 length 36 inches Thank you

After 18 years with no issues, the door lock will not latch.

The patent number on the part is 4930739.

Stamp:24 3 (small BSI TB) Length (not including end pieces 24.5" 2 balances needed Unfortunately not able to ID manufacturer

I have a drawer that measures 20" deep and it's 23-3/8" from the front of the cabinet to the inside back where 32-018 would be mounted. Which length slide do I need? 32-060 or 32-061? Thx!

The sash retainer clip/counter weight is broken.

The handle and crack groves are worn off

hello.i would like to replace my handle and lock.i am not sure what part i need or if even available? thanx for any help

Cannot find a model # but handle/latch belongs to our sliding glass door. Only info says "Reflectolite Product, Sun Valley CA" on it. House built in 1990, so from that timeframe. The handle has loosened and cannot be tightened any more. Would really like to know if there is a replacement availab ... (cont.)

The inside handle broke off of our sliding door. The door is about 17 years old. We are looking for something to replace to fit the door or just the handle itself. It measures 5 inches screw to screw. Any suggestions would be greatly appreciated.

Made by Acadia, installed in 1973. Plastic handles are failing, cracking and breaking off. Hole centers are 4-7/8". Are replacements available in any style? Thanks

Attached is the only photo I have at this time of a metal bifold door pin.It is bolted to the door with adjusting by sliding the door up or down. The pin is bent under the door.To install/uninstall remove screws and pull/push door away from pin. The pin, whats left of it, is one piece. What's not ... (cont.)