Viewing all customer Discussions for:

Other

It is a plastic trim under the metal trim, the metal trim that holds the glass snap in the plastic trim and covers the plastic trim, I found this serial number on the glass - IGCC CBA IGMAC CIG

Can you identify the replacement part for this Tilt Latch? It is on a Pella Replacement window purchased from Lowes in 2008. Thank you.

Marking on glass IGMAC 005164 Lock-pane

Hi, I'm not sure who manufactured our storm door but the window retaining strips are starting to crack and separate. If you carry these ones, I'll order them. Hope the pictures are clear enough. Thanks so much! Al

Unable to determine window manufacturer. Windows are likely from 2003 and are non-tilt. Length of metal channel is 26 3/4". Length is 28" including top and bottom plastic guides. Channel depth is 5/8" and channel width is 5/8"

Hello We would like to add a lock to this sliding glass door handle. Are you able to recommend I handle that can fit into this current sliding glass door? Thank you very much!

I need two replacement window locks for my Window World replacement window.

I am looking for these plastic caps that seem to hold the springs etc. in place. Do you know what these are called and if they can be ordered.

I have a Pella sliding door PCSWCLT7281x0 748171 I need the roller assembly replacement for the bottom of the door.

Looking for two single track pocket door wheels, with bracket. Wheel diameter is 1-1/8", 1/4" wide. Thank you

Need new 2 triple coil balance systems. Can't figure out how to order the correct part that will fit Simonton window Info on side of window: F0933 4/22/04 2 cwp SS HWI 33.31 3 x 29.000 PL@8 0376394201001 WH 00 i7 (?)

I am looking for at least two better-bilt window clips/guides, that keep the window in the track. Sorry if the photos aren't great.

Need replacement for Mepla 9M hinge. Number 510.357.00.13 Distance between screw holes 1 7/8". Diameter of hole in wood door 1 3/8"

Can you identify thus part and tell where to buy a replacement

I want to find a replacement for my door handle/knob for an older Cole Sewell door.

It is 9/16" wide by 17" tube with a 3" mounting strap. The window weighs about 9#s. The photo is on a scale in case I missed a measurement. This window is closed in the up position, but I dont believe that matters to the balance, but I don't know for sure. I'll need 2 of them to finish my project. T ... (cont.)

I need 2 of these. The back says Canada CP1638.

I have a 30 plus year old truth 2 bar hinge. I broke the nylon slide so I need a replacement. My hinge has 315-3 stamped on the shorter arm. I do not see any on your web site that are the same size. Mine is 8.5 "long on the side that holds the nylon slide. Would a similar unit work to replace my ... (cont.)

I am looking for the lock for a sliding glass patio door. The total length of the handle showing vertically is 6 5/16 in and the distance between two screws is 4 3/16 inch. Could you please help me find the whole set shown in the two pictures? Thanks a lot!

I do not really know the name of this part, nor the function. From the uploaded images, there is one image named "window-model-number" and that is the only sticker/label I can find from the window. And the window channel balance has a stamp "86 29-9 DA5 CMC 7". Other than that, no labels were found. ... (cont.)