Viewing all customer Discussions for:

Other

I need to know what replacement coil balance part I need for a double hung comfort world window. The window weighs 12 pounds. CWW1 shows the top coil with a 3 on the cover. Below it is the pivot shoe. CWW2 photo shows the bottom coil with a 9 on the cover. CWW3 photo is the assembly on the other sid ... (cont.)

I have Jeld Wen crank out windows and it appears the black weather stripping on the top of the window is broken and hanging on the outside of the window, Can this be replaced?

Looking for 2 plastic door pull as in the pictures above, I couldn't find any brand name anywhere

Broken Swisco hinge has number on back of 03037.67The plastic spring has broken out of all 50 in the house.Replacement hinge: My neighbor had his replaced many years ago and they have a metal spring instead of the plastic. It is pictured as the Replacement hinge.Homecrest replaced the hinges free be ... (cont.)

Sliding doors maybe from 60-70s?.?. Roller came off, I've bought several different ones over last few weeks, nothing fits. The roller looks to be ½ x ½ though can be sure without removing 1. Thanks for any help.

patent # on broken lock is canadian 919213

Good morning, Im having troble identify this lock on my house. any help would be great. House was build in 1978ish. it sits inside the storm door. i can not find a lock that is this size. Thanks in advance for the help.

Here are the pictures we previously sent. Let me know what other information you might need.

Small bathroom window, Spring travels approximately 16 in. Channel width 1 1/4. Channel depth 9/16. Spring width 1/2 inch. 5/8 opening. Total double-hung window size is 28" by 36". Probably have to remove some of the vynil to get the spring out. P.s. This site is amazing especially if you could ... (cont.)

Rear drawer kitchen slider

My old cottage windows have this pile in between each sliding sash. They are supposed to be glued to the frame. Time has work then down. Any recommendations?

I have several windows that may have been made by Capital. They are approx. 15 to 18 years old and the double hung tilt window shoe requires replacement on a number of the windows. I hope you have a part number so I can order replacements from you. Thanks for your help - Fred Fink ... (cont.)

I have a Slide Right self-closing screen door and I need the latch assembly.

I need one of these

Hello, I need two of these sash balances for the right side of 2 different windows. Is this the only picture you need to identify the part or do I need to take it out and see if there are numbers on the back of it? Please help. Thanks so much! Charlie U8 11L 12-87

Hello, The rollers on my 10' Cascade sliding glass door have worn out. I called them, and they sent me to you. Can you direct me to the proper rollers and where to buy them please? Thank you. Tim

What part number should i order for a tilt latch and seal replacement? American craftsman 8501e 8500 series window Thank you

Looking for possible replacement parts for old 1950? Windows channel is 53" long. Each double hung has there own channels. Channel is 5/8" wide with interior spring. Not sure what it's called.

I'm looking for these swivel corner keys and also a couple on the latches. As you can see from the photo that the key on upper right is missing the downward part of it, the left one is ok. The lower right latch has the same problem, it's there it's just broken off. The other issue in findings these ... (cont.)

I need to identify and replace this window part please.