Viewing all customer Discussions for:

Other

Hi, I have windows made by Weather Shield, a Visions 2000 tilt out single hung. The pivot bars are breaking on two of my larger windows. I cannot find even a close match looking through your pivot bars. I've attached pictures of both the pivot bar and the latching piece on the balance (not sure of t ... (cont.)

I sent two pictures 1 with part # 1 of handle I don't need the locking mechanism Only the handle

There is one on both sides both broken.Window weight is 19.2 pounds.The measurement 24x44 inches. The whole window is 48"wide and 47"tall.Thanks for your time Kevin

Looking for two bay window lock and 8 screen holders

No markings on this thing anywhere, I currently don't have access to the sash to weigh it either. I'm not sure which model I should be choosing

I have a 1490 15" channel balance similar to the 15' series 395 chnnel balance but am unsure which stamp option to use the 141- 1460. I would say it is either between a 1450 or 1460??

50DHWIV428.813x26.500 What holds the window in place.These windows were installed by Master Works co in early 2000 time. Always been easy to manage. top can be pulled down and out to clean; bottom push upward and open inside as well. The component that holds the screen in on side is messing up. T ... (cont.)

PLEASE provide me with a link as to how I can order more of these. Thanks, Richard

My sliding patio door Handle is broken.

No numbers on part tag on window says series replc casement most 2650 nami

Appears to be 1 1/4" long, 3/16 high/deep, 5/32 wide. off a screen door glass frame. Do not know the brand. Has a 6 by the tilt bar, 20 on the leg below the tilt bar, and 0 on the leg parallel to the tilt bar. Any help is much appreciated, Thank you.

I have a broken tilt latch. It's 2 and 5/8 inches long and 11/16 inches wide. It slides into the window frame and is cream/white in color. Do you carry this size item. Thanks.

In need of five sets and no key locks are required

Can you tell me the best replacement part for my Millgard Casement Window Operator? The window was installed about 1999. Let me know if you need more information. Thank you.

lower guide 1/2 wide, don't know how long it was to start with

the 16" side rails w/vinyl tab each end. spring and cords inside. also the flat metal tab inside wall frame on each side. 1 1/4" by 1/4". if you have them price and 800# pls. thanks, roy

Hi My name is Arthur and I recently ordered from you. I need a couple more parts. Thanks

We are having a hard time locating the attached casement parts. Please help.Thanks,Debbie

I can not find any names on the windows. They have a metal band that helps hold the window on position when opened. I've had a few of those break and coil up on the window track.

Hello, We need a replacement handles for this MW sliding door lock. Thanks!