Viewing all customer Discussions for:

Other

I need to replace some of these little bronze/black plastic pieces that clip on the inside edges of the sides of our single hung windows. There are two on each edge. Looks like they're there to keep the metal edge of the sliding part of the window from scraping on the inside of the stationary metal ... (cont.)

Stamped on metal arms are 41011 and 31876

Can these be overnighted ASAP

looking for a replacement window crank

I do not have part number, only the model: SAL S HD

Hi,Can't seem to find the matching part, any recommendations? Thank you,Josh

It's a pivot bar for a vinyl window the head is T shaped and is 1/2 inch all the way across and it's 3 ? inch long overall.

THIS IS ONE SIDE OF A SLIDING DOOR HANDLE. CAN YOU IDENTIFY

Looking to replace the crank.

My window has a spiral window ballast 21 inches and the round is 3/8 tip of the ballast is red, don't know what kind of pivot shoe needs please recommend. Thank you

The parts needed came out of my 1998 patroit man. home the pivot bar is 2" ,long has three tapped holes square end with a groove on top. First hole from pivot end measures 3/4" next second hole measures 1 1/8" and 3rd holes which is used measures 1 9/16th " thickness is 3/16th" width is 1/4". lookin ... (cont.)

This exterior door was purchased at Home Depot in 2017 or 2018 or 2019. It is wood. It has a window that slides up and down. The tabs have broken off of the spring loaded latch mechanism that holds the window up and releases the window for cleaning. Measurements are included in the pictures attached ... (cont.)

Hi I need A replacement can you tell me which part I should be buying thanks

Looking for one rail attaching to drawer and dresser

Would you be able to tell me where I could find the cranks for these windows? SNE ENTERPRISES, INC manufacturer of windows Thank you Marla

This balance is for a non-tilt window, 1/2" channel. I identified this balance as a: 27" Series 380 Channel Balance (2630). Please confirm.

who made the door? Thanks in advance

HI, We have a screen door that is 78 5/8 tall and 36 wide. Do you have something that would work for this. Unfortuanately the name is worn off the tag. Otherwise, do you have the replacement wheels. That is the most important part as it does not run smoothly or quietly. :) Any questions let me kn ... (cont.)

We have old Anderson window screens - house was built in 1999. Our old part was 1 1/16" length and 6/16 ". Width

Dimensions in pictures. No scores or trademarks except an "L" that is inside a circle and an "L" that is not. -can see in picture.