Viewing all customer Discussions for:

Other

Wheel is 2-1/4 appears to be 1/4 inch shaft but hard to tell because it is pressed on.

The handle broke and the mechanism thrown out. As you can see the latch strike is on the outside of the door frame (is that surface mounted?). Not the center. The door is white. The handle could be white or black. Your help is appreciated.

Hello, I have a double set of screen doors where the one side is regularly used and the other side is able to be opened, but has a built-in latch at the bottom and one at the top where they engage in the threshold. The doors are in great shape but I need to replace these two latches. Ive looked a ... (cont.)

Drawer guide for older kitchen drawers.. 2 1/2 inches wide - Space (mouth) 1 1/4 inches.

Length 26inches Width 5/8 inch (metal part) Width of plastic between 1/2 - 5/8 inches Depth of plastic upper one between 5/8 - 3/4(upper is defined as when placed on window) Depth of the bottom plastic one 1 inch and 1/4 Width is about 34.5 Weight 5-6 pounds no tilt window, moves up and down. ... (cont.)

Need a latch on right for Pella screen door. would like it to latch. unit on left has a slider insider. Builder never put in right side. please advice parts needed.

I order wrong type and must return. Do you have this one?

Hi I would like to get replacements for these parts, operator and handles. Can you help me with that? Thanks

Would like to replace window balance with 2730 BSI (sideway) and NC stamped on old balance. The challenge seems to be finding them with winged plastic ends attached. The length of the metal part of the balance is 28". The plastic wings are 23 mm or 29/32" wide (slightly wider than 7/8" but not qu ... (cont.)

My client has had this sliding door installed for years without the locking hardware. I was unable to find the manufacturer's name anywhere and I'm hoping you can identify it from the attached photos.Please let me know if you have the replacement parts for this door.Sincerely,Chris ... (cont.)

0369 is a casement crank that is operational. 0370 shows a crank with a missing pin. I have two cranks with no pin, so I need two pins. Both need to be white.

Crank-out casement window. D series, clad case/awn 076-N-330 is noted on decal. Original seal feels hollow, though now flat and not sealing. Approximately 3/16 inch wide channel seal is in. Need to id correct seal and replace on four windows. Thank you

Need the door Mechanism for my iron storm door

Need to know what item to buy to replace these. The ones I bout do not match

Can you please help me identify this part? I have several broken ones I need to replace.

Looking for these plastic guides, can they be found?

Need 3/16 × 2 1/2 in replacement bottom window pins for my 1994 modular home there very narrow can't find them yet

I am trying to find some locking mechanisms for my casement windows. Hopefully these pictures help identify the part I need. Thank you!

pat 4.241.541 40753, 20755,31538A i need 2left and 2 right i am returning 39-032 and 39-031 qty 2 of each i can not find on site either the link arm is to long or to short the ones i rcvd the link arm was to long i need link arm to be 3-3/4 inch long paul

See photo. This is a 20 year old seal so my measurements are off a little due to compression. This product looks like it. Product Code: 58-156