Viewing all customer Discussions for:

Other

I have a bifold mirror door closet heavy one and it has corner block pivot made by ACME US Patent Number 4644992. I am not able to fid this part. Any advise will be appreciated. Thank you Michael

Hello, I am looking for 2 villa soleil nightstand hardware that was broken by my contractor that painted my home. I need an answer quickly if you carry and how much each. He will be stopping by tomorrow to look at what is staff damaged. thank you, laurie dickerson

Length of channel 25 11/16 In case you can't read stamped identifier, parallel to channel is 25 4 rn, perpendicular to channel between 4 and rn is 3.s.i. Thanks for your help.

We are in need of window repair parts. Attached is a picture of the window with the pivot lock shoe that is broken. Are you able to advise what item(s) we may need to repair this and the parts we need to order.

Top slider/roller broken off and missing. Top of door mirror is loose, flops around. It's from a Stanley/Monarch Safety Mirror. The "hotline" phone number now goes to a different business. Might be 40+ years old. See photo of label.

Hi, I need to order rollers for a sliding glass door and need some help ordering the right part.

Good afternoon, I was hoping you could help me identify a proper replacement for this glass door slider. On the wheel it reads Saunders Engineering. Is this something you carry?

Hi, I'm looking for a Mepla 9M 348.258.00.32 hinge replacement. The hole to hole measurement is 3/4". Do you have this or a similar hinge? Thank you, Midori

Looking for the strike plate the latch hooks onto

Roller says SYRACUSE N. W Not sure on the W it is where the roller is broken Measures 2 1/4 inches long not counting the part of the roller that sticks out Measures 1 3/8 tall not counting the roller and the end part that sticks up Nylon wheel is 1 1/2 inches

On 1 of my casement windows the metal piece that attaches to the bottom corner of the window and slides along the metal runner on the frame has rusted and become detached from the window. What replacement part would you recommend? My window measures 26"w x 45"h. The metal runner on the frame is 10" ... (cont.)

This is for a double casement window. It open from the center of the two windows out to the left. Numbers on it are 060410. 10:00. There is an 8 firmed into the metal all by itself down by the screw holes. Customer needs it right away so if you have it please order it and contact me for payment ... (cont.)

Hello I'm trying to find replacement track part for vinyl windows. Windows were installed by previous owners so we don't know how to identify the part. I've attached pictures of the part needed if you can help me identify it I need to fix 3 windows. It is 1/2" and 32" long. Thank you ... (cont.)

The pivot lock shoe has a 530C number just below where the pivot bar connects. The pivot lock shoe is 2 1/4 inches long, 1 1/4 wide, and 1/2 thick. Do you have a pivot lock shoe replacement this size? Thanks, Mark

Please help!

Hello. I'm looking for a window channel balance matching the description above. Do you carry this?

Hello In dire need of a replacement crank operator. Picures attached but in case you cannot see, the words written on the shaft is L LEMCO CROFT METAL PRODUCT MCCOMB MISS PATENT NO [***I cannot read all of the numbers***] 28306?? 2852?? 64???

I need a replacement mortise lock assembly for sliding glass door my 86 Silverton 34c. It has an Adam Rite mortise lock set however both lock cylinder and outside & inside face plates have broken. I am looking for anything that will work I've attached photos. Any help will be appreciated. Thank ... (cont.)

We have been unable to find this part. We need 8 sets. Your help is appreciated.

Hello, My bathroom window balance coil broke on both sides of the window. The coil has #6.5 35" P stamped on it. It also has the number 5232208 stamped in the same place. Not sure what parts to order. Please help.