Viewing all customer Discussions for:

Other

Ref order #1594931 I have MW single sash vinyl windows, determined I needed S795-29 channel balance and 26-366 pivot bars. All measurements matched up to the old pivot bars in diameter and screw locations, even the lip stop looked the same. The problem came when installing the pin length is shorter ... (cont.)

Hello! Our sliding glass door lock got stuck and doesn't properly lock. I would like to replace the lock and if possible the handles as well. Thank you!

The handles are fine but the lock mechanism is broken and the flip lever does not seem to go in very far . It does not seem to be broken.

Metal measures 32.5 inchesShoe depth is 1 inchMarking on metal is " 32 4 "Metal width is 5/8My name is Steve

Hi, I'm looking for a replacement for this piece. The front of my drawer falls off and I cannot find this piece of hardware at Lowe's or Home Depot.

These are from Patriot windows that were installed by Ryan homes in 2008. Patriot is now out of business. I am trying to find parts that will replace these. I have a picture of the tag on my window. I tried the 15-195B but they would not fit my channel

I'm looking for the locking mechanism (on handle side and frame side for this Nami sliding door.

Gentlemen. Want to replace two complete Atrium brand locksets as shown in photo. And 16 hinges for the same Atrium doors also in dark bronze. I can access these doors again for more info. Thanks for tour help.

I'm looking to replace several cranks that come out when cranking the window back in. The handle unscrews into my hand.

Plastic part on my aluminum window

elongated 3"-4" length

Hello, Were going to clean/restore these windows in our new house. They are overall in good shape but these end caps have yellowed while the rest of the window is white. I can't seem to find any kind of replacement part for these end caps. Hopefully we're not forced to try and paint them. Thanks ... (cont.)

The long arm is 11 inches and the short arm about 3 inches. IT still works, but it is broken where it attaches to the window frame. I am guessing it is a 39-239B, but want your opinion.

Channel length; 22"Channel width (at bottom) 5/8" (at top) 1/2"Any markings were barely visible;"Caldwell" and either "21-4" or "21-A". The stamping was a very light ink and almost completely faded.Thank you for your help and reply if more info is needed.Craig

Hardware for slim ding glass door cc-pass 537-45(rev c) date built 03/09/14

Looking for replacement for complete door handle and single mortis lock

Looking for replacement hand cranks. Large quantity needed 25 rights and 21 lefts. Any help you can provide is very appreciated.Pat 4505601 Canada 1986 UK pat 2135397Thanks Paul

Sliding door PGT, high impact

Hello, I need 4 rollers that look like the attached. The upload limit is 5, so I had to send this in several posts. See attached images for shapes and measurements at different angles. I have also included photo of the window sticker on the slid door. The rollers dont have any indication or part ... (cont.)

Can someone please help me identity what door this is? Or a piece that would fit? The striker was broken off by previous tenants and we cannot figure out a replacement part! The glass sliding door is Pella but I cannot tell if the screen door is the one that originally came with it or not. ... (cont.)