Viewing all customer Discussions for:

Other

Marking on existing balance is 26-3 ED5 CMC 87 Length of metal is 27 inches with a width of 9/16 Block and tackle with single spring

I also will need the opposite hand Operator too. Can you help me narrow down this one to the item number? Otr t least close. I have the catalog already. Thank you.

Nami 5700 sliding patio door lock

Research tells me these might be pella? Anyway, need some parts to refurbish some windows.

Need a replacement for this patio door sweep.

Metal with plastic tip

I have a wood framed glass sliding door with two sets of "Truth" side adjusting tandem rollers with the numbers 30410, and patent # 4.194.266 stamped on the body of the roller unit. I have been told that the "30410" is not a part number but a component number. Do you have a part number that I can us ... (cont.)

I ordered replacement wheels because one was jammed and inoperable but the description didn't say the wheel was convex. Obviously I need a concave wheel for my particular track. Thanks, kathy

Upper bifold door guide. Lip rides on channel not in channel. 1970's era hardware.

I have checked every window in the house (they are all the same size) and no names or markings. I have 7 of these windows and 5 of them are missing at least one or both sides of this item.

Dear Swisco:What Bottom Roller assembly and track do I need? The opening is 58 1/2 inches and the rollers are convex, but worn. The roller assembly is 3 1/8 inches wide by 4 1/2 inches. The screw holes are 3 1/8" on the side of the assembly/ side of door and 2 1/4" ond the width or bottom of the ass ... (cont.)

These are the top window locks and bottom window locks installed on MW Windows from 1999.

I am looking for the plastic clips that hold the window grilles in place.

Markings-V X V. L shape bracket to attach to inside of dresser drawers.

I need this glazing

The window parts I need is the one that goes inside the white locking part.Image # 1 and 2.Thanks,Expedito

Do you have anything like this? The parts get screwed into the side of a vinyl door. The top Tee (one is broken) slides on the track and the bottom pieces just keep the door aligned with the bottom track.Thanks,Scott

I've watched your video on how to replace a vent latch but it's not the same as mine. The one I have has a metal piece at one end. Can you give me directions on how to install it please?

This is my second request. Any help you can give me is GREATLY appreciated. I am trying to find these pieces for windows in my parents home. They are 75 years old and I am trying to get these windows fixed for them. Thank you!!!

Please see photos. I need to replace this plastic glazing on all windows in a home I purchased in Phoenix, AZ. The window latches indicate they are "Jordan" brand. I believe this is your product 55-192. Can you please confirm? Is there a substitute glazing product that you offer that will bette ... (cont.)