Viewing all customer Discussions for:

Other

Just need a replacement pin for a window

Looking for 4 wheels

I need to replace this Do you have these The metal is 30" long 9/16" deep 11/32" wide

How do I know which coil spring weight to order??

Replacing crank since window won't open or close. Brand name on crank is Truth.

Hello, I would like assistance finding the correct replacement. The inside of the handle is stamped "DNS INDUSTRIES12 INSIDE PULL MIAMI FLA. -1400 SERIES" Thank you for your help.

Do you have this hinge in stock?

Channel is 30". I'm thinking series 385 30". Just need to verify. Thanks.

The photos don't show the spring well because I couldn't figure out how to remove it. The balance spring is against the outside-facing edge of the channel, and I didn't see a screw or other removable fastener. The sheet metal that surrounds the spring appears to be held by a pin. There is a dark ... (cont.)

I have a 11 inch 1020 balance. I believe that the channel balance shoe is a unwinged 15P162 with a 15P32 top. But would like to verify prior to ordering

Good morning, We're looking for a corner key for a rolled aluminum screen frame. My measurement of the rolled screen section that this corner piece fits into is 3/8" thick x 9/16" wide (outside width), and I believe the key size is 1/4" wide by 7/16" (but not sure). Picture is what we have and ne ... (cont.)

Looking for these guides

I ordered one that was supposed to be the lock I needed but it's not.

Need to replace the coil spring on my window. The cam is Tee shaped, which I am finding hard to find.

I would like to order a 17" channel balance for a double hung window installed in 1979 but don't know how to select from options 16R, 16HD and 16TG. Can you explain? Photos attached. My plan is to order one and see if it works. If it does I would order several more.

As you can see from my drawing the total length of mine is 6 5/8". Do these come in that length. If not I can route out the hole on the door to fit. Mine is brass (originally before discoloration)

need bulb casement weatherstripping for weathershield window. goes on jamb latch side, see picture

Looking for this part or a full replacement crank.

we are looking for the material that holds the screen in to a vinyl window like in the profile in photo

I have damaged my Pella sliding patio screen frame. The screen frame is 4 ft x 8 ft and the frame members are 1 1/2 inches wide and appear to be aluminum extrusions with a plastic corner fitting inserted. Can this corner fitting be replaced and do you have such a part? The part has not been removed ... (cont.)