Viewing all customer Discussions for:

Other

The locking lever broke. Using screwdriver to lock door. Please help.

Hello, I have several broken coil's on my windows. The channels do not seem to have a notch in them to remove them. I assume I need to cut a notch in the channels to remove. Please advise. Also what info you need so I can order the correct replacement parts? See attached pic. Thanks ... (cont.)

Looking for that part Thank you

Can you identify these cranks? They look like the Caradco 39028 on your site, except that the crank arm is longer. The 9 1/2" measurement on your site looks to be 11 1/2" on my mechanism. One of the attached pictures shows the crank mechanism wit a tape measure to show relevant measurements.Thank ... (cont.)

Missing attachment fastener. Have adjust fastener. Need 2 units and attachment fasteners.

Width is 1/2 inch length is 21 inches without top and shoe. Stamped with 20 4 AD caldwell.

Pella NFRC PEL-N-004 Corner clip for sliding screen door.

We have 4 windows all the same type and the balancers are broken and looking for a replacement. Thankyou Scott

052-275712 warranty info Po is 2963 Date is 3/4/03 35 1/2x45 Series 0401 double hung

I need this piece for the storm door deadbolt to work in the lock.

please email

Hello. I need to replace 4 of these channel balances. My home was built in 1996. I am a home owner who is not a quick learner ?

Part mounted on window that keeps balance secure

Operator part numbers: -40055 -4 -T -LH

I'm curious about which way I'll need to turn the spiral. We removed both balances and noticed the tension when doing so, and didn't know we'd have to add tension back until we got everything back together. Now the sash is fairly difficult to raise and has no staying power to remain up. It's kind of ... (cont.)

I am missing 2 of the decorative bolts from my garage door.

I need the pins that go from the window to the window adjustment bars thanks JEF

These pulls each have four screws in handles.

There are no identifiable markings. Universal handle from Home Depot was not a match,

Hello, It looks like my Anderson windows have a track for what could be screens that fit into them. I don't have any screens and would really like some. Do you have any screen hardware or the screens themselves that may go to these types of windows. There are 4 total windows