Viewing all customer Discussions for:

Other

Looking for this type of bracket with roller any ideas.thanks Dave

Wheel diameter = 1 1/4 in Length = 3 1/8 in Height = 15/16 or 1 in Width = 9/16 in All metal material Adjustment and attachment screw in back

The crank slips and want to replace it. Looks more built in to the window. Is there a part?

This bracket fits a glide that is 22" long, 1" wide and 3/8" deep. I am having difficulty locating a bracket that is wide and deep enough to accommodate the dimensions of this older style glide. Please help.

Need window sash lock.Vernon

16 inch long 1/2 wide One of the black parts is broken and one of the bottom almond/white parts is broken. I don't see any part numbers on either of them. The metal channel sash balances says 1520 and then a symbol that looks to be AT in a circle then a trademark symbol then HR. Trying to identify ... (cont.)

When we moved in 3 years ago the key got locked in our storm door. We replaced one side of it but now the handle won't adjust and is falling down. We love the door but want to replace the handle with another handle that works.

I'm looking to replace all of the hinges in my kitchen. They are Mepla hinges. Can you have anything like this. Thanks Brian

I need both a right hand and a left hand cover and handle for a Thermal casement window- series Sellebrity II. What part would work?

I am looking for replacement pull handles for an O' Sullivan 4-drawer filing cabinet purchased in 1998. It was model #10125 (Norwegian Alder). A unit # was given: 101250-9. The pull was part #431224-4. It's black plastic and is about 6 7/8 inches long. Measurement between screw holes is about 4 7/8 ... (cont.)

Hi, I broke the pivot pin on my double hung window and I need a replacement , but don't know what kind it is. I don't know what type of window it is either. The windows are 6 ft by 3 ft double hung.

Can we replace just the lower window panes? They are 30 x 30.

i need these slides in the inside for the outside of the drawer its for a tv stand im trying to see if i can get those same slides for the outside of the drawer

I am looking for mull hardware for 49" tall marvin integrity windows.10 mull kits.Also nailing flanges.Thank'sDan

Trying to find the lower and upper hinge for this window

Hi, my name is Rachel Pong. My tenant broke the sliding door. Please see the photos I attached here. Photo 1 - the knob is disconnected with the inside lock parts. There is a very tiny gap in between the door and the edge. I just wonder if there is any tools that can fit there to unscrew the screws ... (cont.)

This window hinge broke off the internal mechanism that is located inside the window frame. Can this part be replaced or do I have to get a whole new window ? Or can I remove the window frame for access to the main part that controls the handle that opens and closes the window?

have a 1962 9' 3 panel slider, so door is 3' with broken handle, would like entire assembly. don't see in all your pictures.

I would like to replace my Milgard screen corner pieces as they are plastics and crumbling. It appears to be 1/2 thick. I can't locate a mark, or number. The we milgard windows were purchased 27 years ago.

Good afternoon,Could ypu please identify and quote on 6/ea window balancers, ends per the attached photo.They are stamped "26 3" and "RN BSI TJ", the metal section is 27 inches long, and the overall length tip-to-tip of plastic end pieces is 28 inches.Thanks!Paul