Viewing all customer Discussions for:

Other

find this part

I am looking for an exact replacement if possible but have not been able to find anyone who has this exact part. I'm hoping you have something that works!

I need 2 double hung Sash Coil Spring Balance, and 2 Sash Balance Break Shoe. The measurements of the window are ---32 wide 56 long. ( Pretty close.) I don't know if the part should be # C-3 or C-4. Please help me. Thank you

Wooden handle where duct tape is. Hole space is 5 5/8"

Height 2" Width 1" Thickness 1/2 Looking for those parts i need 10 pieces. Thank you

Could you get the attached patio door handle set for Alpine window? Thank you.

. Need 4 right and 2 left white casement handles The base is 5 1/4 inch long

Looking for the appropriate replacement part for pivot shoe and latch

Do you carry these?

Need help with identifying the channel balancer: Channel Length - 26 inches Markings on the channel - 25 3 BT CAL DWELL

Looking to replace broken side arm that holds up a Jeld-Wen awning type vinyl window. The part that the arm is part of says "Interlock 12C-1S23 JE". I looked on the Jeld-Wen site but no luck. Thanks, John

I need a replacement drawer slide. This is 12" long when not extended open

I need to replace the rollers on my Guardian sliding Glass door. Looks like it is a double wheel roller. This is what is printed on the door: Guardian Geneva, NY ANSI 2871-2009 16 CFR 1201 11 safety tempered SGCC 2259 1/BUA CAN / CGSB - 12.1M

Part 1 (left and above)? Plastic/Aluminum Hook Imprinted with PAT No 2997754. Attaches by 1 small screw to fixed point on the frame. Cranked to fully closed position, Part 2 (below) rests hooked under the metal latch. Part 2 (right)? Plastic stub that appears to attach and be held by friction to th ... (cont.)

Securing bracket for stationary glass panel on aluminum 3 panel patio door. Does not have to have rubber bumper since door slides opposite direction to where clip is missing. Material is aluminum.

This lock is in the active door panel frame. It is secured by the long screw from the end of the frame. The key rotates the cylinder which moves the cam at the back end of the lock set which in turn activates the rod encased in the active door frame to engage into a hole in the threshold which loc ... (cont.)

Pocket door rollers need replaced. Any suggestionsCarol

Hello Seeking assistance with identifying this lever for a push open window.

Needing new mecahanisms for multiple awning windows. Will also need cranks, but not sash-mounted guide rods. One of the two "push bars" is stamped with a "13". Any ID help would be appreciated. Thank you!

Markings are 26 5 BX CMC stamped on pulley channel. I am not sure how old the windows are. Would appreciate some guidance to see if it's an easy replacement or better to call a window company. Thanks in advance!