Viewing all customer Discussions for:

Other

This piece of hardware is about 3 inches long. There is one on each side of the window. One photo shows it broken apart and the other photo is of the side that is not damaged. I need to get a replacement for the one that is broken. Help please!

7/16corner OPENING OF ENTRANCE OF FRAME 1/2"×1/4 ... THICH STOM WINDOW SCREEN FRAME

I need two shoes for an Amsco vinyl casement window. C-LC25-36x72. The top and bottom black plastic shoe broke, they do not stay in the groove of the ss operator track. When opening the window, it falls out of the frame and the hinges just bend. The photos attached are of the window adjacent to the ... (cont.)

(917)5739805

Hello, we are looking for drawer brackets. I believe it has Ferrari imprinted on it. I am enclosing images, some with measurements. Hoping you can help us get the right size. Thanks for your response. Michelle

I need a replacement for my sliding glass door handle. Do you have a replacement for these door handle parts?The lock gets stuck which prevents someone from exiting the property in an emergency such as a fire. Very unsafe.Thanks so much. I look forward to hearing from you.Regards,Raymond ... (cont.)

searching for replacement bracket a left and right side. Number on part is 471029

Picture show left side parts I need 2 set of left side and 1 set of the right Thanks

3 piece door guide for bypass closet doors. Note picture of door rollers submitted in previous message.

Pat. 5,353,548

1980's Aluminum window glass frame - single glass pane type. I could not find in your web site the glazing bead of the same cross sectional configuration as shown in the attached pictures. Please help me to find if you have one like this. Thank you. lao tseng

Its an emtek 322. The inner rotating part that moves the regular latch in and out is broken. No Idea for the complete assembly part or I need the broken part number. I don't care either way. Would be nice to have info for both options. Thx.

Existing balance is from a Seasonshield sh window. 30 inch length / 1/2 inch channel w/ID # "29 5 IX CMC 7"

I would like to order some of these, but I can't figure out exactly what they are. Help?

Need top brackets that goes on the window

Trying to figure out how to order replacement parts. Two of my windows have broken balances. Above are pictures of the removed balances. Thanks!

Another St. Charles part request. These stationary rollers support a blind corner drawer. 1-1/8" OD, 1/4" wide rubber tire. 3/16" cotter pin axle.

I have crestline windows that were installed in 2001. Truth is stamped on the hardware and they are dual arm however the ones i saw on the site do not connect to the bracket that is on the window. Please help if you can. thanks for your help.george

I can not find these items anywhere. I have to replace them all in my house. They all use the same part.

Hi there, my sliding door is hard to slide. It looks like one side is higher than the other. Do you have roller and track that fits