Viewing all customer Discussions for:

Other

this is a 30" channel balance with text stamped 29 6 0a BSI. I need to order 2 replacement assemblies. Thank you

Only need handle replacement Found patent number 7.871.112B2 as well as Q28G, nothing else Including several pictures

WIDTH 1 1\4" DEPTH 9\16" HEIGHT 2 1\2"

Hi can you please help me with this channel balance Thank you

This is the left-hand window all parts are included on the opposite side for a right hand window I am missing the two parts that are circled as far as where I can identify from your site it is the stud bracket I saw one that looks the same but the mounting stud is facing down instead of up he's faci ... (cont.)

There are two modules on the bottom of the sliding window. Each module in a nylon frame with two wheels that snap in. the wheels measure 13.5mm Diameter x 5.8 mm wide. they have a molded axle that is 6mm in diameter. Around the top of the frame is a molded on bezel that keeps the snap in module from ... (cont.)

Look to replace 4 sash's. Unsure of what to purchase.

I am look for a replacement Truth window closer part # 120198.Please see my pictures.Your help with this matter would be greatly appreciated!Thank you in advance.Regards,Daniel

Window opening size is 20 inches vertical 30 inches horizontal. Crank does not move window and is loose when turned. Numbers are DF 1100A; CCMC 9186; Brevet Can #1,160,103; Brevet USA #4,400,923; ????????A3,B3, C3.Side arms are ok.The window moves freely when pushed in or out by hand with the c ... (cont.)

Need to replace some draw rails see photos can you help?

Hello, I have a window screen that measures 18-1/2" high (top to bottom) and 30-1/4" wide with sliding locks in the frame as shown in the attached photo. The sliding lock on the right side of the screen frame is broken. I have attached a photo of that as well. The sliding lock measures 3/8" high ... (cont.)

Can we order from you?

I need two of these single hung window balances. The total length, with the plastic end pieces included, is 18"

I want to get the screw covers for this door to then paint the trim. The door trim is plastic. Can I paint it or can I buy replacement trim? The outside trim has yellowed from the sun. Please let me know. Thank you so much!

I am looking to replace a window lock (see pic). It needs to work with a Truth Folding Handle with Cover 39-375 that I am purchasing from you. Can you assist with providing compatible locks? Thank you, Nora

I need to order 6 complete assemblies with top & bottom shoes. Here is the channel info.Window Sash (Spring loaded) channel balance for ALUMINUM Pull-UP WINDOWSSINGLE HUNG PART #3250 BSI MD33 IN LENGTH9/16 IN CHANNEL WIDTH5/8 IN DEPTHNumber stumped on the part is 3250 BSI MDThe original window ... (cont.)

These windows are 41 years old, and the original weather seal material is very worn/deteriorated. Size looks like 3/16" x 3/16" Also, it does not have a plastic backing, but appears to be a woven material, which is somewhat flexible. Notice that only some of the channels on the windows have an op ... (cont.)

I bought 23-041 for the bottom and they were a perfect fit

Hi This is Alisa. My outdoor door handle has been broken for many years. It fell off yesterday. I tried looking for the exact fit but unfortunately i could not find it. Menards gave me more information about you. I linked pictures of the handle. Would you able to let me know if you have the handle? ... (cont.)

Where can I find them?