Viewing all customer Discussions for:

Other

looking for this

I am looking for two parts.1. I need a drop down draw pull for a Thomasville "Pagentry" open shelf book case.2. I need hinges for a Thomasvill "French Court" armoire part # of the armoire is 18239-01-010 or 17811-340 these numbers came from the delivery manifest these were purchased in 1 ... (cont.)

I have two windows which need to have the sash balances replaced. 1st window has numbers listed as: 26 4 CW CMC 10 and the pictures are for that one. 2nd window has numbers listed as 20 4 LV CMC 2. I had to put that window back together so didn't get pictures for it but the sash balance looks the e ... (cont.)

The pin is in the sash and is slotted in the rail. There may be 2 pins

I need the 2 wheels(rollers) on the bottom (vertical) and the2 wheels(rollers) on the top (horizontal) for my sliding glass doors that were installed in my house in 1960. The fixed glass pane is roughly 34" X 75". The sticker on the aluminum door frame is: Ador, Ador Corp Fullerton California Pat ... (cont.)

Do you have a replacement that matches this?

1977 single pane

Hello, I have a Window Lock (38-036) that fell out of its socket. There should be a metal backing plate used to secure the lock to the window frame but this one is missing. I'm having trouble finding a suitable metal plate (or is this something people generally make themselves?). I'm guessing I'll ... (cont.)

ok heres pics of ends. code on balance is 30 3 my balance measures, metal only, 30 5/8"

The pivot bar in my window is broken. I have attaached a pic of the good one

I have Mastic windows where the tilt release levers are brittle and breaking. I do not see any on your website that have the same measurements. Wondering if I missed the one I need or maybe you have others not listed. OR maybe a substitute?

The rubber stripping is brittle and the sides seem to have been a pile type but are flat now was wondering if there is anything you have that i can replace them with Thanks

Hello there, Do y'all happen to carry very old sliding door locks like in the pic??

Hi, I was told by service repairman Mark of EZ-Slider company who came by today and looked at my sliding glass door windows that my mortise needs replacement. I am contacting your company because ESP of FLA was an identifying plastic part on the sliding glass door walls.However, I am unable to remo ... (cont.)

What part is this on your website? I have your S350-21 channel balance but the top sash guides listed for that don't quite look like mine. I would say all of my top sash guides are broken in my house so it's hard to get a picture of a whole on. The top is broken off in most of my photos but it's a f ... (cont.)

size of locking mechanism is 5 3/4" in length

Need to replace the sash balance but unsure what specific replacement part needed for my Andersen window. It is double hung, about 32 1/4 inches wide, 33 1/2 inches in height.

please help. your product 26366 looks similar however the "T" on the end that goes into the shoe does not look the same. do you have another one that might work? thanks

This is the picture of our window springs. I spoke to a customer service representative and requested a picture of our window Spring. Thank you A. Nelson

Hi,I am looking for a replacement handle/lock for the sliding screen on my KK Windows Patio/French Door from the attached images. Is KK Windows still in business? Our house was built in 2000 and I cannot seem to locate this company online. Thank You! Chad