Viewing all customer Discussions for:

Other

need door handle for nailingfin lock

The channel is 29 inch's Long and is stamp with 28B l also need sash guides picture in the last pic

Looking for a dresser drawer slide replacement. It is the mate to the drawer slide item number 32-082 heavy duty Kenlin socket. This slide is used on Basset furniture.

Photos one and two are a damaged piece photo three is one that's in place operating properly.

Looking to tell the part that fits inside the frame of the door that allows the support bolt to screw into and secure the top and side frame

I'm trying to track down this part. It is stamped with the numbers 23181. There is another marking above that number, but I can't read it. Thanks

I need some of these Ellison window locks/latches. Let me know if you have anything that will work. Thank you, DL

it is the piece of plastic trim that covers up where the adhesive is on the window. it snaps right in the metal frame. it about 1/4 in by 1/4 in.

Thanks for taking a look at this. I can tell you that there is a marking on the side at the center of the "T"- the number 2.

The crank system on our milgard casement windows has stopped working (appears like the internal gears are totally worn down). Would like to buy a replacement part and fix it.

Hello, The weatherseal I'm trying to match comes from a window with an aluminum frame - vintage 1970's. There are no marking on the window frames or the existing weatherseal that I can see. It's a piece that fits on the outside and brushes up against a sliding window panel to keep the weather out. ... (cont.)

Hi! I need to figure out which window balancers to purchase for my milgard windows.

HELP!!The lock on my patio door suddenly failed. The lock lever no longer operates (from locked to unlocked position) and I am unable to open the door. I noticed just today that the latch felt oddly "loose" and was starting to look for replacement latch parts when the complete failure occurred. ... (cont.)

This piece came out of my window. Any help in identifying the size is much appreciated. Thanks!

HelloI have a T.T. Beyrle door assembly PAT.NO.2923.036 SET P.A.2 (FEB. 2, 1960) that we need a new top offset pivot for. I have attached two pic.s of the Hinge needed. Any help on this would be greatly appreciated.Thank youRick

The identifying sticker is on top of door but completely weathered away. The glass can be swapped out for a screed door. Need to refresh a number of things: Handle & Lock Sweeps Weather seals Clear Plastic clips holding glass in place. Can you advise on the brand of door and the appropriate parts? ... (cont.)

This is what came out of my window sash. Note the upper housing has a piece missing from it. Looks like the bottom is 4lb and the top is 5lb, there were numbers on the springs that did correspond with the casings. Can the whole things be replaced, they look pretty worn and cracked, and what would th ... (cont.)

This is a gapco window. Part number stamped on the balance is 1530 It is 15"

The plastic for a few of these pivot shoes have broken and the spring has come out. I need your help identifying the replacement part. Thanks in advance!

I need to ID these parts on an old vinyl window Rt and lft flanking casements top and bottom hinges, sash track and operators. Thank you, Peter