Viewing all customer Discussions for:

Other

I need help to identify the correct operating mechanisms for two of my Crestline replacement windows installed in 2003. Window description is provided in photos. The operator arm has Truth 31850 on it.

Need to replace the pins? On the window sash the go into the spiral tension piece, this is a tilt window. The pieces that I need to replace have rusted off.

I have an older Glass Bi-fold closet door. The guide pin is binding on the track because the guide roller broke. The spring stop also broke. The only part number I could find on the closet door is the Acme 17-4405 corner block. My condo apartment was built around 1980. Thank you. ... (cont.)

Door operating very heavy and adjusting rollers ineffective. Roller appears similar to your part #81-158 but tabs shown on top of casing not showing on your part 81-158 (which I have ordered this am). Have I made an error or will 81-158 work for my door? Mark Tooth

Why do some sashes do not have the clips and how to take them out

hi,one of the above latches is broken and i need a replacement . would you have the part? i don't know the brand.neil

hello. These top and bottom rollers come out of our sliding doors which are approximately 35 years old. the bottom roller is 1&1/4 in diameter, and the top roller appears to be 1&5/16ths. My mom doesn't remember what brand the sliding glass doors are, she said "maybe peach tree". the top roller look ... (cont.)

2nd posting. I forgot the photos on the first one. I believe it is a S395 but not certain. Length = 28" Weight rate = 2730

I believe you have mentioned part number 36-045 in one of your posts to match the casement hinge as shown. Is that correct? If so, how can I order a pair?There are also other Truth Hardware very similar but slightly different, such as both arms meeting at the same pivot instead of being attached to ... (cont.)

More than 20 years old, door on Pella patio slider. Can't find any tag or marking on the door itself to figure out the model

what is this latch called

Need plastic housing to hold 3coils

Do you have a replacement

ANSI 297.1-1984 SGCC 945 5/32U

I need a window channel spring ballance which is 29" long and has a number UB 28 D for the right side is an aluminum window 50" by 30" the spring has 2 white plastic clips on both ends. please give me a price for one with the shipping cost. thanks. Douglas Chin-Yee

Each side of the door has a roller-pack that contains only one roller. I know by now that each roller-pak has a main screw to hold it attached to the door and an adjustment screw. The doors must be older than 12 years (we moved into this house 12 years ago) The door frame thickness is one inch, the ... (cont.)

Eagle window screen windows. This is the upper clip.

I sent in a request earlier with photos/ I find it odd that the window shoe on the right side has an O above the cam, but upon a closer look the shoe on the left side has an upside down P just about the cam. As I said in the earlier request the show is not engaging and the cams have broken when I ... (cont.)

I need a piece like this

The cam broke on both sides as I was trying to tilt the window. These windows are from Softlite. I think there is a 0 above the metal cam. I do have replacement pivot pins, which I had to replace already. I thought that would help the window engage but the shoes are just staying at the bottom of t ... (cont.)