Viewing all customer Discussions for:

Other

I think I ordered these from you 10 or 15 years ago.

I need one single guide for my glide track

33 4 GN CALDWELL 1/2 inch wide by 34 inch long swisco 380

is there any way toreplace the mirror on our closet sliding mirrored door - 24 x 78 inches. the frame and hardware are fine. debbie

Crank arm bent in hurricane need replacement

attached i a photo of the sticker on the window I am looking to repair the other picture showed, it seen the spring is no longer attached to it. Can you assist on what part i need??

New work no shelves needed just all hardware ?

One dang screw was loose so as I started to unscrew stuff to then tighten it back together... I stupidly unscrewed too much and the lock mechanism slid down inside the door. I'd (in this order) 1) take the door off/turn it upside down/get the parts out and screw it in right but can't seem to get th ... (cont.)

Need 2 rollers for glass patio door. Wheel is approximately 1" diameter. Door was likely manufactured around 2000. Thanks, Kevin

Atrium non tilt window. Thenumbers on the side are 28 3 GW CMC 7. Can you suggest a replacement balance? Thanks.

Hi,The subject item on one of our windows has broken and I am looking for a replacement in pair but having trouble to find the right part. The house was built in the late 1990/early 1991. Please take a look of the part number (32 3 JJ Caldwell) on the first photo (track1.JPG), which I can't find in ... (cont.)

I have an MI white vinyl double hung window that needs a replacement balance. The number stamped on the metal guide covering the spring is 35C. What is the SWISCO replacement part?

double hung balance spring replacement

Hello, I am in need of replacing these parts for my 2 of my windows. Could you direct me to the proper parts. Thanks

I need a replacement Balance double coil. Length 3 15/16m width 1 1/4, thickness 9/16 1/12" spring. 1 each Also need the two T shaped pins, I am confused on the pins as my other windows same style only have a pin that is about 1 1/2" long.

Looking for a sliding door handle. The brand says International on it

Then handle is 41/2 inches long with nubs that are approx. 1/2 inch long on each end.

Hi, I need to replace the spring balance in my Traco window. It is a single coil with measurements of 2.25 x 1.5 x 0.5. The window is 12lbs. Thanks, Dave Mattox

Need a window crank and housing. Ordered one from you on my own and got wrong one. Crank gear is larger and sits on far right.

I bought the new channels from you according to the directions per you tube video and measurements. The channels fit great. The top if the windows have a plastic piece that is broken on one side. The right side is not catching on the channel. I am hoping you can figure out what the name of this ... (cont.)