Viewing all customer Discussions for:

Other

33# window 33 inch metal part long with wings 22/32 and 1/2 inch wide ribbed current balances dont hold window open

need a new channel balance

Can anyone tell me who makes these parts, or what i would use as comparable replace? Thank you

14 x 28 1/2 need correct replacement part # Thank you

I think you call these awning windows where window opens up from bottom. Two initial arms out measuring approximately 9 3/4". two secondary arm approx 6.5". 1 attaching arm approximately 10 7/8". Handle says Truth. operator is white. lip against window is 4 3/4".height of operator lip against window ... (cont.)

I recently ordered corners for an Anderson screen. The old corner is on top the new one that was sent is on the bottom of the picture. The new one is "thicker" than the new one and will not slide into the frame. Is there a match for the old one pictured?Thanks Ted

Looking for a replacement for a plastic drawer socket that split in half (picture shows the piece minus the broken half). It attaches to the back bracket via a slot in the drawer socket which a metal piece from the bracket fits into. Length is 2.5 inches. Any help you could provide would be appreci ... (cont.)

Hi. We have an American Craftsman 50-series (the inexpensive $300 Home Depot slider kit). My children broke the little interior lever that would lock the door. My husband attempted to fix it by removing the mortise and in the process, lost everything. I now only have a door, an exterior handle, and ... (cont.)

I'm not sure if plastic wheel can be sold separate. The bearing number is 608zz ABEC 7.

I need replacement weather stripping for my milgard casement windows. Do you have anything that's suitable?

Trying to ID what type of balance I have

Im looking for window screen latches that old screen in at bottom. these are for Pella windows, maybe 35 years old, about an inch square.

I need to replace the upper sash of a window. H-R35-48x72 Series: 300/2300 AAMA / NWWDA 101/ I.S. 2-97 At minimum I would need a replacement window but that would be the last resort.

Hello! My name is Chuck. Part of our handle to our sliding glass door broke and we need to purchase a new one ASAP. I look forward to hearing from you, thank you.

Can you please help me identify this coil tension spring for a double hung vista window.. Outer Paine

I'm trying to find a replacement for Andersen balance marked "11600-17" and "J21 5#23 1135". Double hung window has two equal sized sashs with visible glass size of about 32-3/8x13-7/8 each. What should I buy?

I need to find a new door assembly for my door. Seems the spring in the outside handle is broke. The screw holes on the inside handle are 5 ½" on center. See the third attachment for third view you asked for, the edge of the door.

Hi, So I have identified the top sash guide as 18-033, but my window also this L-Shaped spring piece that I can't seam to find anywhere. Let me know if you recognize it. Thanks! Luke

I have successfully replaced my new spring mechanisms connected to my new pivot lock shoes. However, my existing pivot bar (pictured) does not slide down into the new pivot lock shoes. Can you recommend a replacement pivot bar that will fit my existing window and fit into the new pivot lock shoe? ... (cont.)

Sent email on "contact us" after finding the ability to upload. I require a knobset with integral dead bolt. 6 hole design for a 1" thick storm door, aluminum clad w/ wood core. The image of the door shows the 6 holes w/ a rope in one to open door. Thank you for your help - Anthony ... (cont.)